Download Print this page

Torbal DRX-4C Quick Reference Manual

Hide thumbs Also See for DRX-4C:

Counting Prescription Drugs for the first time

1. "Press Tare" will appear on the scale's display, indicating to tare a counting container.

PRESS

TARE

2. Place an empty vial or counting container on the pan. The

container's weight will be displayed. Wait for the weight to

stabilize and press the T key to tare.

3.498

-------

3. Once the scale has finished taring "Scan Bottle" will

appear on the display indicating you should scan the

NDC code associated with the drug.

scan

Pill Counting - Quick Reference Guide - DRX-4C

(DRX-4C)

Table of Contents

Do you have a question about the DRX-4C and is the answer not in the manual?

Page 1 Pill Counting - Quick Reference Guide - DRX-4C Counting Prescription Drugs for the first time (DRX-4C) 1. “Press Tare” will appear on the scale’s display, indicating to tare a counting container. PRESS TARE 2. Place an empty vial or counting container on the pan. The container’s weight will be displayed.
Page 2 Pill Counting - Quick Reference Guide - DRX-4C 4. Scan the NDC code by slowly placing it under the scanner light. 5. The scale will display SAPL On (sapl On). Manually count the required piece sample and place it in the container on the pan.
Page 3 Pill Counting - Quick Reference Guide - DRX-4C Counting Prescription Drugs Stored in the Database (DRX-4C Only) : Advanced Pill Counting Accuracy (APA) 1. To enter Pill Counting Mode, press the function key. Select “count” by pressing the T key.
Page 4 Pill Counting - Quick Reference Guide - DRX-4C 4. Once the scale has finished taring “Scan Bottle” will appear on the display indicating you should scan the NDC code associated with the drug. scan bottle Note: If Rx Verification has been enabled, the bottle NDC and Rx NDC label must be scanned to allow the scale to check whether there is a match between the two codes.