Advertisement
High-ceiling Bracket
Assembly and
Installation Manual
Model
POA-CHL-PL01
■ 設置上の注意
When hanging a projector from the ceiling using this high-ceiling bracket (hereinafter
called "the ceiling bracket"), the ceiling must have adequate strength to support both the
Installation
projector and the ceiling bracket. Before installation, check the combined weight of the
Precautions
projector and ceiling bracket as well as the strength of the ceiling based on that weight.
If the strength is insufficient, provide adequate reinforcement before proceeding.
• Always mount on a level ceiling. Never install on an inclined ceiling.
• During installation, take appropriate measures to prevent lateral swaying due to
earthquakes or vibration (using wires, etc.).
The total weight of the ceiling bracket is 5.2 kg.
Contents
Installation Precautions .................................. 1
List of Accessories .......................................... 2
Attach the ceiling bracket to the ceiling ........ 2
How to adjust the projection angle ............... 4
Be sure to consult with a qualified
installation specialist.
This high-ceiling bracket is specifically for
use with our projector listed above. Do not
use for any other equipment or purposes.
Be especially careful that children do not
hang from it. Perform proper assembly and
installation by following these Instructions.
Be sure to follow all precautions.
Advertisement
