Table of Contents
Advertisement
CONTENTS OF THIS USERS MANUAL
GRAPHIC SYMBOLS
Your Labnet Problot hybridization oven uses internationally accepted graphic symbols to
help convey information to the user and to call the users attention to important safety
precautions and guides for using this equipment. Use of this product in any manner
not specified by the manufacturer may impair the safety protection provided by
the equipment and may result in physical damage and/or personal injury. Please
read all operating instructions in this manual prior to use of this equipment.
Indicates that user should consult manual further description or discussion.
Indicates AC "Power On"
Indicates "Degrees Centigrade"
"Indicates Potential "Shock Hazard"
SAFETY PRECAUTIONS
1. Although the Problot Hybridization system has been designed to minimize user
exposure to radioactive materials, proper precautions must be taken when using
radioactive material.
2. Always inspect the hybridization bottles, caps and seals before use. Do not use
bottles, caps or seals that are cracked or chipped. Cap seals should be replaced if
they are severely deformed or discolored. Special attention should be paid to
inspecting bottle rims / threads.
3. DO NOT take bottles to temperatures higher than 70ºC without opening and
retightening
the cap to relieve pressure build-up. Temperatures above 70ºC can cause
breakage of hybridization bottles. If chamber temperatures rise above 70ºC when
bottles are in use, DO NOT OPEN THE OVEN DOOR. Reduce the temperature
setting to below 70ºC or turn the power off and allow sufficient time for the bottles to
cool below 70ºC before opening the door.
page 1
page 1
Platform/Installation Care
page 2
and Maintenance
page 2
page 2
page 3
page 3
page 3
Indicates "Heating"
Indicates "Temperature
Indicates Protective "Earthground"
page 4
page 5
page 6
page 6
page 6
page 7
Advertisement
Table of Contents
Need help?
Do you have a question about the ProBlot H0600A and is the answer not in the manual?