Advertisement
Wall Mounted Slide Finish Assembly with Anchors (6803-8030-268)
Wall-mounted slide finish assembly mounts directly to wall and does not utilize a rough-in
assembly for installation.
1.
Use wall-mounted slide finish assembly (A) as a guide and mark two mounting holes
on wall.
Wall Mounted Slide Finish Assembly with Anchors
2.
Drill two 5/16" mounting holes into drywall.
3.
Install two anchors (D) into holes and tighten screws (not shown) supplied with
anchors (D).
4.
Remove and discard screws supplied with anchors (D).
5.
Install two screws (C) (provided) to secure wall-mounted slide finish assembly (A) to
wall.
Part No. 9100-1000-113 Rev. A Pg. 2
©2004 BeaconMedæs. All rights reserved.
For technical support or
Corporate Headquarters
For technical support or to
Corporate Headquarters:
to place an order call
BeaconMedæs
BeaconMedaes
PO Box 7064
1800 Overview Drive
13325A Carowinds Boulevard
Rock Hill, SC 29730
Charlotte, NC 28241
Phone (803) 817-5600
www.beaconmedaes.com
Phone (704) 588-0854
Fax (803) 817-5750
www.beaconmedaes.com
Fax (704) 588-4949
:
place an order call:
1-800-756-2590
1 888 4 MEDGAS
Fax (803) 817-5750
(1-888-463-3427)
Fax (866) 635-3296
Advertisement
