Hubbell GAI-Tronics 190-002PS Installation Instructions

Weatherproof power supply kit

Advertisement

Weatherproof Power Supply Kit
Field Installation Kit Instructions
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information which is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.

General Information

The Model 190-002PS Weatherproof Power Supply Kit includes the following components:
Qty
Description
1
15 V dc power supply
1
Mounting bracket
1
2-gang electrical box
2
Mounting screws
1
Box cover and gasket
4
Tamper-resistant screws for cover
1
Conduit hub, ½-inch
½-inch × 3 inches galvanized conduit nipple
1
1
Installation instructions
1
DC power cable harness
1
Tamper-proof Torx bit
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374
V
ISIT WWW
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 190-002PS
800-492-1212
.
-
.
GAI
TRONICS
COM FOR PRODUCT LITERATURE AND MANUALS
Pub. 43003-045C
Fax: 610-796-5954

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GAI-Tronics 190-002PS and is the answer not in the manual?

Questions and answers

Summary of Contents for Hubbell GAI-Tronics 190-002PS

  • Page 1 Pub. 43003-045C G A I - T R O N I C S ® C O R P O R A T I O N A H U B B E L L C O M P A N Y Model 190-002PS Weatherproof Power Supply Kit Field Installation Kit Instructions...
  • Page 2 Pub. 43003-045C Model 190-002PS Weatherproof Power Supply Kit Page: 2 of 3 Installation Refer to Figure 1 for installation details. Figure 1. Power Supply Installation Mounting Addressable Amplified Speaker Prior to mounting the spacer: 1. Remove conduit insert from bushing (white). 2.
  • Page 3 Pub. 43003-045C Model 190-002PS Weatherproof Power Supply Kit Page: 3 of 3 RF Call Box Prior to mounting the RF call box: 1. Locate the dimple on the bottom right side of the call box enclosure (facing the front of the unit). 2.

Table of Contents