Hide thumbs Also See for Pro Series:

Advertisement

Quick Links

User Guide
Thank you for purchasing a
Traveler Guitar Pro-Series!
Traveler Guitar is the industry's leading manufacturer of full-scale, travel-
sized instruments. Most travel guitars sacrifice playability for portability—but
at Traveler Guitar, we believe players need both. Since 1992, we have
designed full-scale acoustic and electric travel guitars, offering a wide variety
of solutions for players on-the-go.
The Pro-Series Guitar you hold in your hands is a hybrid acoustic and
electric guitar that can go with you almost anywhere. It has is similar to
other guitars, except in its "In-Body" tuning system which allows it to be
shorter than conventional guitars. The tuning machines operate like
traditional tuning machines, yet they are mounted in the body of the guitar.
Strings pass through the endcap, then around the String Rollers and to the
Tuning machines mounted to the back of the guitar. The tuning keys are
accessible from the front of the guitar to allow tuning while holding the
guitar in the playing position.

UNPACKING YOUR GUITAR

If your guitar is factory packed it may be wrapped in a silver, temperature insulating mylar
bag. This bag can be discarded.

INCLUDED ACCESSORIES

Gig-Bag, stethophone headset, short thumb screw/ strap button, stethophone
adjustment allen wrench, allen wrench for knobs and truss rod wrench
travelerguitar.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pro Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Traveler Guitar Pro Series

  • Page 1 Traveler Guitar is the industry’s leading manufacturer of full-scale, travel- sized instruments. Most travel guitars sacrifice playability for portability—but at Traveler Guitar, we believe players need both. Since 1992, we have designed full-scale acoustic and electric travel guitars, offering a wide variety of solutions for players on-the-go.
  • Page 2 STOWED POSITION PLAYING POSITION SETUP: Your new Traveler Guitar Pro-Series will arrive in what we refer to as the “stowed position”. To prepare your guitar for play, there are a few short steps to follow: • Detach lap-rest from stowed position on back of guitar by unscrewing the thumb screw / strap button.
  • Page 3 SETUP USING THE STETHOPHONE: • Plug the Stethophone into the Stethophone Jack. It should fit snuggly. • You can manipulate the tone of the Stethophone using the provided allen wrench to adjust the screw located between the serial plate and rollers on the back of the guitar. Use subtle adjustments.
  • Page 4 To change strings, you will need a pair of wire cutters. A string winder is not necessary, but can speed up the process. The tuners on your Traveler Guitar operate just like the tuners on a standard guitar. We recommend changing the strings three at a time because some of the components are held in place by string tension. First remove the old E, A, and D strings, and then install three new strings in their places.
  • Page 5 finish. STORAGE: When not in use, your Traveler Guitar should be stored in its included gig bag to protect it from exposure to the elements. Protect your guitar from extreme temperatures and changes in humidity. Never leave your Traveler Guitar in a closed vehicle or any other location where the guitar will be exposed to extreme heat.
  • Page 6 Traveler Guitar dealer. Traveler Guitar will replace or repair, at its discretion, any Traveler Guitar instrument or part thereof, which is found by Traveler Guitar to be defective. Traveler Guitar reserves the right to use original replacement materials or materials of similar design at the time of the repair.
  • Page 7 PT ROLLER SPACER Saddle for Pro-Series PT SADL PRO UL Vol/Tone Knob for Pro Series PT KNOB PRO 3-Way Selector Switch for Pro Series PT 3-WAY PRO SWITCH Output Jack PT OUTPUT JACK PS SPD Lap Rest for Pro PT LAP PRO*...

Table of Contents