Connecting A Dvd Player Or Satellite Receiver And A Vcr - Toshiba 32HF72 Owner's Manual

Connecting a DVD player or satellite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, and TV
programs, record one TV channel while watching another channel,
and record satellite channels.
You will need:
• two (or three, if satellite receiver is used) coaxial cables
(one or more may be provided by your cable or satellite
company)
• two sets of standard A/V cables
• one pair of standard audio cables
• one S-video cable (between the TV and DVD player/satellite
receiver)
From antenna
Stereo VCR
IN from ANT OUT to TV
CH 3
CH 4
TV
From satellite dish
I N
S-VIDEO
VIDEO
L/MONO
AUDIO
R
VIDEO-1
DVD player/satellite receiver
IN from ANT
S-VIDEO VIDEO
OUT OUT
VIDEO AUDIO
L
ANT(75 )
ANT-1 OUT ANT-2
I N OUT
COLOR COLOR
STREAM STREAM
VIDEO
Y Y
HD - 1 HD - 2
VAR
AUDIO
L/
P P
MONO
B B
L L
L
AUDIO
AUDIO AUDIO
P P
R R
VIDEO-2 R R
R R
AUDIO
OUT
L
R
Note:
For the highest possible picture quality from
a non-component video DVD player/satellite
receiver, use an S-video cable between the
TV and DVD player/satellite receiver. (If your
DVD player or satellite receiver has
component video connections, see page 10).
Do not connect both an S-video cable and
a standard video cable between the TV and
DVD player/satellite receiver at the same
time, or the picture performance will be
unacceptable.
Do not connect the DVD player/satellite
receiver and VCR to the same video channel
on the TV. (See the illustrations, which show
the DVD player/satellite receiver connected to
Video-1 on the TV and the VCR connected to
R
Video-2 on the TV.)
IN
OUT
The unauthorized recording, use, distribution,
or revision of television programs, videotapes,
DVDs, and other materials is prohibited under
the Copyright Laws of the United States and
other countries, and may subject you to civil
and criminal liability.
AUDIO CENTER
CHANNEL IN
ON OFF
9