Table of Contents
Advertisement
Installation
This section describes how to prepare your Jack.
Installation Safety Rules
Pay attention at all times during installation. Use appropriate tools and equipment. Stay clear of
moving parts. Keep hands and fingers away from pinch points. Safety is a top priority.
⚠
WARNING
Use caution when unpacking the Jack and setting it up. The unit is heavy and the weight is not
evenly distributed; dropping components could cause equipment damage and personal injury.
⚠
CAUTION
Setup
The following drawing shows where the bottom of the Handle attaches to the Chassis.
Top view. Not necessarily to scale. Not all components shown.
RBJ-30TL 30-Ton Air Bottle Jack
You must wear OSHA-approved (publication 3151) Personal Protective
Equipment when installing, using, maintaining, or repairing the Jack: leather
gloves, steel-toed boots, eye protection, back belts, and hearing protection.
Certain parts of installing the Jack are difficult for just one person. BendPak
Ranger recommends having two or more work together to install the Jack.
7
P/N 5900031 — Rev. B — Jan. 2020
Advertisement
Table of Contents
