Dolphin Poollift Neptune with Transporter Operating And Product Care Instructions

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Poollift Neptune

with Transporter

Operating and Product Care Instructions

Doc.:065

Rev.: 0

Datum: 26/11/2012

Table of Contents

Need help?

Do you have a question about the Poollift Neptune with Transporter and is the answer not in the manual?

Questions and answers

Summary of Contents for Dolphin Poollift Neptune with Transporter

Page 1 Poollift Neptune with Transporter Operating and Product Care Instructions Doc.:065 Rev.: 0 Datum: 26/11/2012...
Page 2 Thank you for purchasing Nibotechncis equipment. Your POOL LIFT is one of a series of quality products designed especially for hospitals, nursing homes and other health care environments. Please contact your local distributor if you have any questions about the operation or maintenance your Nibotechnics...
Page 3: Table Of Contents
Contents Page SECTION Safety Instructions Product Description/Function Parts referred to in this manual POOL LIFT: maximum capacities POOL LIFT resident transporters Using Your POOL LIFT 7-10 Transferring to pool side with chair Transferring to pool side using the stretcher Attaching the chair or stretcher to the POOL LIFT Transfer to the pool Transfer out of the pool...
Page 4: Safety Instructions
Safety Instructions • is dependent on caregiver who is present in demanding situations POOL LIFT can be used to lift a person, who: • sits in a wheelchair • can partially bear weight on at least one leg READ BEFORE USE •...
Page 5: Product Description/Function
Product Description/Function Parts referred to in this manual Fig. 1 9.Footrest 1. Mast 10. Braked castors 2. Boom 11. Support column 3. Chair handle and hook up bar 12. Column location socket 4. Chair / Stretcher retaining catch 13. Base plate 5.
Page 6 Product Description/Function POOL LIFT: Maximum capacities Toilet / Commode / Shower Chair (TCS) POOL LIFT (Socket or Base plate mounted): The chair, which can be attached to / detached • fitted with standard boom: from the POOL LIFT, has a removable sub- - 680 mm - 160 kg (352 lbs) chassis.
Page 7 Using your POOL LIFT Neptune WARNING Transferring to Poolside with chair To lower the stretcher, hold the backrest The chair arms fold back for easy resident and lift it slightly, then lift up the ratchet access. Once the resident is suitably dressed position plate by holding either of the for swimming, transfer him/her into the chair ratchet plate knobs ONLY (See inset to fig.
Page 8 Using your POOL LIFT Neptune before attaching the chair or stretcher. Reverse the chair unit or bring the stretcher, sideways on, towards the POOL LIFT mast until the top of the support frame comes into the close proximity of the mast. WARNING Adjust the height of the mast so that the hook up bar (with retaining catch) can...
Page 9 Using your POOL LIFT Neptune Sub-chassis fork (LH) chair tube Fig. 8 Fig. 9 To move the stretcher away from its trolley Raise the mast so that the chair wheels are clear of the ground. after hook up to the POOL LIFT, lift the lever situated at the foot end of the trolley.
Page 10 Using your POOL LIFT Neptune Transfer to the pool After the resident has been received by the helper in the pool, remove the mast from the water or return to repeat the procedure for the Release the POOL LIFT rotation lock (See Fig. next resident.
Page 11 Using your POOL LIFT Neptune Release the rotation lock and rotate back over the pool side by pulling the boom towards you. When in position for transfer, engage the rotation lock. If you need to use the TCS chair, raise the seat sufficiently high enough above the floor and insert the prongs of the sub-chassis unit into the chair frame tubes (see Fig.
Page 12: Parts Referred To In This Manual
Product Description/Function Transporter Parts referred to in this manual Fig. 13 1. Winding handle 4. Guide roller 7. Clamps 2. Mast 5. Guide 8. Brake 3. Triangular steady 6. Brake 9. Chassis...
Page 13: Using Your Pool Lift Transporter
Using your POOL LIFT Transporter When this distance has been measured and referring to Fig. 14, continue to fit the triangular steady into the chassis. First, position one of the location pegs into its hole (See Fig. 16) Fig. 16 Then carefully pull back the frame by Fig.
Page 14: Preparation Of Pool Lift Transporter
Using your POOL LIFT Transporter Preparation of POOL LIFT Transporter The triangular steady (See Fig. 13) of the Transporter can be fitted in three separate positions. Each position is intended for the different boom lengths that can be supplied with the Nibotechnics POOL LIFT.
Page 15 Using your POOL LIFT Transporter Position the clamp section of the Transporter POOL EDGE at its lowest position by turning the winding handle (3) anti-clockwise. Open the clamps (4) and approach the POOL LIFT as shown in Fig. 21. Engage the guide (5) with the POOL LIFT column (6).
Page 16: Care Of Your Pool Lift & Transporter
Care of your POOL LIFT & TRANSPORTER For cleaning your POOL LIFT, wipe down Environmental advice with a damp cloth using warm water to which When disposing of any items associated with a mild detergent has been added. the lifter, contact the appropriate local authority for advice.
Page 17: Labels
Labels Fig. 23 1+2. Attention: Read Operating Instructions 3. Safe Working Load: Dependent on Boom size / Serial Number...
Page 18: Technical Specifications
Technical Specifications Component Weights POOL LIFT Minimum weight (average)..............70 154,32 Maximum weight (average)..............85 187,39 Maximum Lifting Capacities Basic lift with a boom of 680 mm............160 352,74 Basic lift with a boom of 1000 mm............160 352,74 Basic lift with a boom of1200 mm ............127 279,99 POOL LIFT STANDARD COLUMN Depth of...
Page 19 Technical Specifications & OMMODE CHAIR CHASSIS 500 mm Seat width 360 mm 1040 mm 495 mm 820 mm 450 mm This is available in: AA1070 Chassis 450 with footrest AA1071 Chassis 475 with footrest AA1072 Chassis 500 with footrest AA1073 Chassis 525 with footrest AA1075 Chassis 450 with footbar...
Page 20 Technical Specifications WIMCHAIR 415 mm 400 mm OOL LIFT TRANSPORTER Standard mast 1722 mm 200 mm Approx. above floor 680 mm 1200 mm...
Page 21 Technical Specifications PPER VIEW OOL LIFT WITH STRETCHER UNIT Stretcher POOL LIFT Head Stretcher Stretcher swing rads. std boom = 190 cm 1 metre boom = 222 cm 1.2 metre boom = 242 cm OOL LIFT WITH CHAIR UNIT WITH AND WITHOUT LEG REST POOL LIFT CHAIR Chair swing rads.
Page 22 Technical Specifications POOL LIFT POSITION A SOCKET MOUNTING 800 mm REF 1000 mm REF floor covering screed Reinforced concrete Epoxy. Resin Mounting socket Grade 35n/MM (5000 IB/IN grout Check for services & ducts in locality of proposed foundations Dimension ‘A’ 50 mm minimum recommended clearance between handrail & mast. If handrail not provided, 50 mm clearance applies from extreme edge of pool to mast or any other obstruction.
Page 23 Technical Specifications ENERAL MEASUREMENTS Raised pools and Deck level pools Boom position B therapy tanks Boom position A Minimum roof height Minimum roof height 2810 mm 2340 mm Mast length (110.5 in) (92 in) 1735 mm (68.3 in) 800mm (31.5 in) 800 mm 1100 mm (31.5 in)
Page 24 Technical Specifications POOL LIFT STRETCHER 1550 fully in position 2000 fully extended 1175 1075 Pick up 1065 125 mm wheels TRETCHER TROLLEY OVERALL DIMENSIONS 520 mm 378 mm 990 mm 744 mm 1405 mm...
Page 25: Preventive Maintenance Schedule
Preventive Maintenance Schedule The POOL LIFT is subject to wear and tear, and the following actions must be performed when specified to ensure that the product remains within its original manufacturing specification. WARNING The points on this checklist are the minimum the manufacturer recommends. In some cases due to heavy use of the product and exposure to agressive environment, more frequent inspections shall be carried out.
Page 26 Preventive Maintenance Schedule Nibotechnics Swimchair Visually inspect the chassis to make sure the castors and footrest are securely attached before use. Examine all exposed parts, especially where there is personal contact with the patient’s body. Make sure no cracks or sharp edges have developed that could cause patient or user injury or have become unhygienic.
Page 27 Preventive Maintenance Schedule Nibotechnics POOL LIFT Transporter Check the condition and bond of the clamp pads and for free movement of the clamps. Check for smooth operation of the lifting mechanism. Make sure that castors are free in their movement and that the brakes operate efficiently.
Page 28 Preventive Maintenance Schedule Nibotechnics trained HECKS TO BE PERFORMED BY UALIFIED ERSONNEL Visually inspect the wire rope assembly for signs of corrosion, fraying and wear etc by removing the cover from the housing. Once removed, visually inspect the rope whilst operating the winding handle to raise and lower the hoist.