Bliss GRAVITY FREE RECLINER Instructions

GRAVITY FREE RECLINER INSTRUCTIONS
To unfold recliner, you may need to release the locking system. If you purchased a recliner with a canopy, the canopy should be snapped
to the frame, on the back of the recliner. NOTE: Some models may not have a canopy and/or drink tray. Recliner pictured may differ from
the model you purchased. The illustrations below are for reference only and your recliner may appear different than illustrated.
1 2
Mov in g par ts un der armre st T o re le ase t he l ocki ng
while r ec li ni ng . do no t p u t syste m, lift l ever o n bo t h
your h and s und er arm re st sid e s o f th e r ecl i ner
while i n mo ti on.
5 6
8 9
Bef ore c lo si ng re cl iner, ma ke
s ur e th e l oc k s are unlocke d .
3
7
Unlock the two locking mechanisms that
are under the armrests before folding your
recliner. If recliner is folded with out doing
so, the locking mechanism will wear.
Make sure your recliner is completely
unfolded before sitting in. Please be
careful reclining while sitting in it. Body
shape and weight will affect the way this
recliner
proceed with caution. To reduce the risk
of injury, DO NOT play on, stand, or jump
on the recliner. The recliner is intended
for sitting
4
ATTENTION
operates. Be careful and
and reclining only.

TROUBLESHOOTING

How to adjust lock tension, if needed.
To adjust the lock tension, it is recommended to
use a socket wrench with a drive socket size of
1/2 in (13mm) and a 1/4 in slotted screwdriver.
1
Remove the plastic
caps covering each
nut of the recliner
lock using a 1/4"
slotted screwdriver.
2
Use a socket wrench to tighten or loosen the
recliner lock nut to the desired tension. Turn to
right to tighten, left to loosen. The locks must be
loose in order for the recliner to lock porperly.
Once the desired tension of the lock nut is
reached, pop the plastic caps back in to cover
the nuts. To lock the recliner, move the lever
down. To unlock the recliner, move the lever up.
MADE IN CHINA
Max Weight Capacity: 350 LBS (158.8 KGS)