Connecting An Audio System; Connecting An Av Amplifier With Built-In Digital Surround - Toshiba 27DF46 Owner's Manual

Connecting an audio system

Back panel of TV

Connecting an AV amplifier with built-in digital surround

This connection allows you to use an audio amplifier with built-in
digital surround and external speakers.
AV Amplifier with built-in digital surround
The COAXIAL DIGITAL AUDIO OUT jack outputs digital audio only during digital broadcasts with digital audio. To hear analog
broadcast audio, you also must connect analog audio cables from the L/R ANALOG AUDIO jacks to the receiver's inputs.
Consult the owner's manual for your receiver to determine the best way to switch between the analog and digital signals.
J3W20521A(E)_P07-13 13
TV
Front
Speaker
(Left)
IN
Digital Audio
Coaxial
You will need:
• one set of standard audio cables
Amplifier
LINE IN
L R
You will need:
• one coaxial digital cable
• Six sets of speaker cables
Note:
For additional information, please refer to your
amplifier owner's manual.
TV
Center Speaker
Surround Speaker
(Left)
13
14/03/2006, 2:12 PM
Front
Subwoofer
Speaker
(Right)
Surround
Speaker (Right)