AQUINUS IMMERSIUS SELLITA SW200 User Manual

USER'S MANUAL
IMMERSIUS SELLITA SW200

WATCH PARTS:

A
C
D

SETTING THE TIME AND DATE:

Instructions:
Make sure that your watch is perfectly dry.
Unscrew the crown and move it to position II to manually wind.
Move it to position III to set the date.
Move it to position IV to set the time.
Avoid changing the date between 4:00 pm and 4:00 am.
Once the changes are made, push the crown back in and screw it down against the
case to preserve its water-resistance.
When a mechanical self-winding watch is not worn for a certain amount of time, its
power reserve (in this case, 38 hours) is exhausted and the watch stops. To restart
it, unscrew the crown to position II and wind the movement manually by turning the
crown 30 - 40 times. This will give it a sufficient power reserve to function normally.
A Hour Hand
Minute Hand
B
B Second Hand
C
Date Display Window
D
Crown
E
E

BASIC KNOWLEDGE AND DIVING INSTRUCTIONS:

- The bezel can only be rotated counterclockwise
- Markings on the bezel are in 10 minute increments
- The markers on the bezel are luminous to show
visibility

USE OF BEZEL:

- To track elapsed time dive
- Move 60 minute bezel marker to the minute hand position
- Track the elapsed time by reading the minute markings on the bezel
- Move the rotating bezel so that the 60 marker coincides with the target finish time
- Move 60 minute bezel marker to the minute hand position
For example if the current time is 10:10 and you only want to dive for 20 minutes.
Rotate bezel 60 minute bezel marker to the 30 minutes mark. When the dive reaches
20 minutes, the minute hand will indicate that 20 minutes has passed since the dive started.
English
SETTING THE TIME AND DATE:
2
English

PRECAUTIONS AND PREVENTIVE MEASURES:

Temperature
Do not expose your watch to sudden temperature changes (exposure to sunlight followed by
immersion in cold water) or extreme temperatures
[over 60°C (140°F) or below 0°C (32°F)].
Magnetic Fields
Do not expose your watch to intense magnetic fields such as loudspeakers,
portable telephones, computers or refrigerators and other electromagnetic appliances
Shocks
Avoid thermal or other shocks as it may harm your watch. In the event of a violent shock,
please have your watch checked by an authorized Aquinus Service Center.
Harmful Products
Avoid direct contact with solvents, detergents, and perfumes, cosmetic products etc.,
since they may damage the bracelet, the case and/or the gaskets.
4
Crown Positioning:
I Screwed in and flush
with the case
Unscrewed / manual
II
winding position
Rapid date change
I II III IV III
Time change
IV
English
Elapsed time: 20 minutes
1
English
3
English
.
5