Selecting The Cinema Mode; Selecting The Display Format (For 480P Signals Only); Adjusting The Picture; Selecting The Picture Mode - Toshiba 26HF66 Owner's Manual

Selecting the cinema mode

When you view a DVD movie (3:2 pulldown processed) from a DVD
player connected to the ColorStream (component video) inputs on the
TV, smoother and more natural motion can be obtained by setting the
CINEMA MODE to FILM.
To set the CINEMA MODE to FILM:
1. Press MENU, and then press
until the SETUP menu appears.
2. Press ▲ or ▼ to highlight CINEMA
MODE.
3. Press or to highlight FILM.
4. Press EXIT to return to normal
viewing.
To set the CINEMA MODE to VIDEO (off):
Highlight VIDEO in step 3, above.
Selecting the display format
(for 480p signals only)
This feature converts a 480p input signal to 540p or 1080i.
To select the display format:
1. Press MENU, and then press
appears.
2. Press ▲ or ▼ to highlight DISPLAY FORMAT.
3. Press or to select 540p or 1080i.
PICTURE
ON
CableClear
COLOR COOL
TEMPERATURE
DISPLAY FORMAT 540p /
SVM HIGH
RESET
:SELECT

Adjusting the picture

Selecting the picture mode

You can select four picture modes—Sports, Standard, Movie, and
Memory—as described in the following table:
Mode Picture Quality
SPORTS Bright and dynamic picture (factory-set)
STANDARD Standard picture quality (factory-set)
MOVIE Movie-like picture setting (factory-set)
MEMORY Your personal preferences (set by you;
see "Adjusting the picture quality" on page 34 )
To select the picture mode:
1. Press MENU, then press
2. Press ▲ or ▼ to highlight MODE.
PICTURE
MODE SPORTS
SPORTS / STANDARD / MOVIE/MEMORY
BRIGHTNESS 25
CONTRAST 50
COLOR 25
TINT
SHARPNESS 25
:SELECT :ADJUST
3. Press or to highlight the mode you prefer.
4. Press EXIT to return to normal viewing.
J3W60321A_En_p30-37 33
or
SETUP
CLOSED CAPTION
CC ADVANCED
PICTURE SIZE
PICTURE SCROLL
CINEMA MODE
:SELECT
or until the PICTURE menu
1080i
:ADJUST
or to display the PICTURE menu.
0
OFF
FILM / VIDEO
:ADJUST
Note:
• The DISPLAY FORMAT feature is available
only for 480p input. 1080i is always output
when a signal other than 480p is input.
• If you notice flickering in a 480p image, try
setting the DISPLAY FORMAT to 540p.
33
27/2/06, 9:55 AM
Menu
Exit