Connecting A Dtv Receiver / Set-Top Box With Colorstream (Component Video) And A Vcr - Toshiba 26HF84 Owner's Manual

Connecting a DTV receiver / set-top box with
ColorStream ® (component video) and a VCR
This connection allows you to watch DTV (digital TV), VCR, and TV
programs, and record DTV and TV programs.
Your TV has ColorStream
TV to a DTV receiver with component video inputs can greatly enhance
picture quality and realism.
From Antenna
Stereo VCR
IN from ANT OUT to TV
CH 3
CH 4
TV
From DTV
Antenna
S-VIDEO
DTV Receiver
with ColorStream ®
3R40121A/E P07-15 11
® (component video) inputs. Connecting your
IN
OUT
L R
VIDEO AUDIO
AUDIO
OUT
Y
COMPONENT VIDEO VIDEO
OUT
You will need:
• three coaxial cables
• two sets of standard A/V cables
• one pair of audio cables
• one set of component video cables
Note:
For the highest possible picture quality, use
component video cables between TV and
DTV receiver. You can connect the compo-
nent video cables to either set of ColorStream
jacks on the TV (HD-1 or HD-2).
The ColorStream HD-1 and HD-2 jacks can
be used with Progressive (480p, 720p) and
Interlaced (480i, 1080i) scan systems. A
1080i signal will provide the best picture
performance.
If your DTV receiver does not have compo-
nent video, use the S-video and standard
audio connections instead. Do not connect
both an S-video and a standard video cable
to VIDEO1 (or VIDEO2) at the same time or
the picture performance will be unacceptable.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
L
R
11
6/7/04, 18:57