Thermokon SR65 TF Quick Start Manual

SR65 TF 868 MHz
Wireless Cable Temperature Sensor
Datasheet
Subject to technical alteration
Issue date: 25.02.2016
A
pplication
Self-powered wireless EnOcean duct sensor to measure the temperature in gaseous media of heating, ventilation and air-
conditioning systems. Configuration via airConfig.
S ecurity Advice – Caution
The installation and assembly of the device should only be performed by authorized personnel.
The product should only be used for the intended application. Unauthorised modifications are prohibited! The
product must not be used in relation with any equipment that in case of a failure may threaten, directly or indirectly,
human health or life or result in danger to human beings, animals or assets. Ensure all power is disconnected
before installing. Do not connect to live/operating equipment.
Please comply with

Local laws, health & safety regulations, technical standards and regulations

Condition of the device at the time of installation, to ensure safe installation

This data sheet and installation manual
N
otes on Disposal
As a component of a large-scale fixed installation, Thermokon products are intended to be used permanently as
part of a building or a structure at a pre-defined and dedicated location, hence the Waste Electrical and Electronic
Act (WEEE) is not applicable. However, most of the products may contain valuable materials that should be
recycled and not disposed of as domestic waste. Please note the relevant regulations for local disposal.
Thermokon Sensortechnik GmbH, Platanenweg 1, 35756 Mittenaar, Germany · tel: +49 2778/6960-0 · fax: -400 ·
SR65_TF_EasySens_Datasheet_en.docx © 2016
www.thermokon.com email@thermokon.de
250528