Table of Contents
Advertisement
INSTRUCTION MANUAL
2 STROKE CHAIN SAW
Perla Barb 62cc Pro
Chainsaw V4 - PBCS001
Use 2-stroke multi mix fuel - 25:1 25ml
unleaded petrol to 1ml 2-stroke oil
DEAR CUSTOMER
In order to achieve the best performance of your product, please read this ins
arefully
before using, and keep it for future reference.
Advertisement
Table of Contents
Summary of Contents for Perla Barb PBCS001
- Page 1 INSTRUCTION MANUAL 2 STROKE CHAIN SAW Perla Barb 62cc Pro Chainsaw V4 - PBCS001 Use 2-stroke multi mix fuel - 25:1 25ml unleaded petrol to 1ml 2-stroke oil DEAR CUSTOMER In order to achieve the best performance of your product, please read this ins arefully before using, and keep it for future reference.
-
Page 2: Table Of Contents
SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail. ■... -
Page 3: Specifications
Model no. PBCS001 Engine type 1E48F(air-cooled, 2-stroke) Equipment mobility Hand-held Engine displacement 62cc Maximum engine power 2.85kw Engine speed 10000 min Engine idling speed 3000±300 min Maximum chain speed 19.3 m/s Spark plug BOSCH L7T Carburetor Diaphragm type Volume of fuel tank... -
Page 4: Warning Labels On The Machine
2. Warning labels on the machine ----------------------------------------------------------------------------------------------------------------- Read, understand and follow all Keep away from fire warnings. Read the instruction manual Pull to start the engine completely and carefully before using the power tool. Wear head, The port to refuel the "MIX FUEL" protection. -
Page 5: Symbols On The Machine
3. Symbols on the Machine ----------------------------------------------------------------------------------------------------------------- WARNING ◆ For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications, please be careful not to make any mistake. The port to refuel “2 Stroke 25:1 Mix” Position: Fuel cap The port to top up chain oil Position: Oil cap... -
Page 6: Safety Precautions
4. Safety Precautions ----------------------------------------------------------------------------------------------------------------- WARNING - READ BEFORE OPERATION A chainsaw is a high-speed, fast cutting power tool and as a result special safety precautions must be taken to reduce the risk of personal injury. ■ SAFETY PRECAUTION Please read this manual carefully prior to operating the chain saw. It contains important safety, maintenance and operating instructions. - Page 7 4. Safety Precautions ----------------------------------------------------------------------------------------------------------------- - When cutting wood sprayed with insecticide, use a NIOSH filter mask for respiratory protection. -Stop the chainsaw engine immediately should children, animals, bystanders or helpers enter the cutting hazard zone. - Hold the chainsaw firmly with both hands with the thumb firmly locked over the front handle. The chainsaw must be held with the right hand on the rear handle and the left hand on the front handle.
-
Page 8: For Safe Operation
5. For safe operation ----------------------------------------------------------------------------------------------------------------- 1. Never operate a chain saw when you are fatigued, ill, or upset, or under the influence of medication that may make you drowsy, or if you are under the influence of alcohol or drugs. 2. - Page 9 5. For safe operation --------------------------------------------------------------------------------------------------------------- 13. Always inspect the chain saw before each use for worn, loose, or dam-aged parts. Never operate a chain saw that is damaged, improperly adjusted, or is not completely and securely assembled. Be sure that the saw chain stops moving when the throttle control trigger is released.
- Page 10 5. For safe operation --------------------------------------------------------------------------------------------------------------- KICKBACK SAFETY RECAUTIONS FOR CHAIN SAW USERS Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a lightning fast reverse reaction, kicking the guide bar up and back towards the operator.
- Page 11 5. For safe operation --------------------------------------------------------------------------------------------------------------- WORSE EFFECTS OF VIBRATION If you continue to use high-vibration tools these symptoms will probably get worse, for example: ◆ the numbness in your hands could become permanent and you won’t be able to feel things at all; ◆...
-
Page 12: Installing Guide Bar And Saw Chain
6. Installing Guide Bar and Saw Chain --------------------------------------------------------------------------------------------------------------- A standard saw unit package contains the items as illustrated. Open the box and install the guide bar and the saw 5. Fit the chain cover to the power unit and fasten chain on the power unit as follows: the nuts to finger tightness. -
Page 13: Fuel And Chain Oil
7. Fuel and Chain Oil --------------------------------------------------------------------------------------------------------------- container to avoid mixing up with gasoline or ■ FUEL other containers. Indicate the contents on outside of container for WARNING • Petrol is very flammable. Avoid smoking or easy identification. bringing any flame or sparks near fuel. •... -
Page 14: Operating The Engine
8. Operating the Engine --------------------------------------------------------------------------------------------------------------- When engine has ignited first, pull the throttle WARNING It is very dangerous to run a chainsaw that lever to return the choke knob to the open mounts broken parts or lacks any parts. Before position and then pull the starter again to start starting engine, make sure that all the parts the engine. - Page 15 8. Operating the Engine --------------------------------------------------------------------------------------------------------------- ■ ADJUSTING THE CARBURETOR (1) L needle (2) H needle (3) Idle adjusting screw The carburetor on your unit has been factory WARNING adjusted, but may require fine tuning due to a Be sure to confirm brake operation during daily change in operating conditions.
-
Page 16: Sawing
9. Sawing --------------------------------------------------------------------------------------------------------------- saw at full the throttle for I 2 WARNING Before proceeding to your seconds and pushing the front job, read the section “For Safe hand guard forward. The chain Operation”. It is recommended should stop immediately with the to first practice sawing easy engine at full speed. - Page 17 9. Sawing --------------------------------------------------------------------------------------------------------------- Bucking and Limbing the initial cut from the bent side and finish by sawing from the opposite side. WARNING Always ensure your foothold. Do not stand on WARNING the log. Be alert to the springing back of a cut limb. ...
-
Page 18: Maintenance
10. Maintenance --------------------------------------------------------------------------------------------------------------- Others WARNING Before cleaning, the inspecting or repairing the Check for fuel leakage and loose fastenings and unit, make sure that engine has stopped and is damage to major parts, especially handle joints and cool. Disconnect the spark plug to prevent guide bar mounting. - Page 19 10. Maintenance --------------------------------------------------------------------------------------------------------------- Oil tank Cutter setting standards: With a wire hook, take out the oil filter through the WARNING filler port and clean in gasoline. When putting the Be sure to wear safety gloves. filter back into the tank, make sure that it comes to the front right corner.
-
Page 20: Troubleshooting Guide
10. Maintenance --------------------------------------------------------------------------------------------------------------- ■ Guide Bar WARNING Be sure to round off the front edge to reduce Reverse the bar occasionally to prevent partial the chance of kickback or tie-strap breakage. wear. The bar rail should always be square. Check for Make sure every cutter has the same length and edge wear of the bar rail. -
Page 21: Ce Declaration Of Conformity
12. EC Declaration of Conformity We: JONO & JOHNO 31 Carngham Road, Delacombe (BALLARAT), Vic, 3356 Declare that the Product detailed below: Gasoline Chain Saw Model: PBCS001 Serial No.: 0001~9999 Brand: Satisfies the requirement of the Council Directives: Machinery Directive 2006/42/EC Electromagnetic Compatibility Directive EMC 2004/108/EC Noise Directive 2000/14/EC (Measured sound power level: 108.8dB (A),... - Page 22 PBCS001...