Summary of Contents for Njoy UAD-880
- Page 1 USB Personal Video Recorder USB Hybrid TV Tuner (USB2.0 / 1.1 PNP TV Capture Box) UAD-880 User’s Guide...
- Page 2 UAD880 User’s Guide User’s Notice No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of us.
-
Page 3: Table Of Contents
UAD880 User’s Guide Contents: Chapter 1: Introduction ........................4 1.1 Package Contents ......................... 4 1.2 System Requirements......................4 Chapter 2: Getting Started ......................... 5 2.1 Connect UAD880......................... 5 2.2 Device Driver Installation ....................5 2.3 Install the TotalMedia™ software..................7 2.4 Setting the TotalMedia™... -
Page 4: Chapter 1: Introduction
UAD880 User’s Guide Chapter 1: Introduction 1.1 Package Contents Upon receiving your UAD880, please make sure the following items are included in the UAD880 package. UAD880 CD of Installation Software Quick Installation Guide USB cable Antenna ... -
Page 5: Chapter 2: Getting Started
UAD880 User’s Guide Chapter 2: Getting Started 2.1 Connect UAD880 To install the UAD880 into your computer, follow the steps below: 1. Connect the TV antenna cable to the connector. 2. Connect the Device to PC USB Hub. 2.2 Device Driver Installation Placed the CD disk that comes with the UAD880 in the CD-ROM drive, then follow the on-screen installation guide below. - Page 6 UAD880 User’s Guide 4. Click “Install” button to continue. 5. Installation Wizard will auto copy driver to PC system. 6. Click “Finish” button to restart PC system. 7. Connect the UAD880 Device to PC USB Hub, then system will detect new driver “UAD TV Box”.
-
Page 7: Install The Totalmedia™ Software
UAD880 User’s Guide 2.3 Install the TotalMedia™ software. 1. Click the “Setup Utility” button. 2. Click “Next” button to continue. 3. Click “Yes” button to continue. - Page 8 UAD880 User’s Guide 4. Click “Next” button or choose setup folder for installation. 5. Click “Next” button. 6. Click “Finish” button to exit.
-
Page 9: Setting The Totalmedia™ Software
UAD880 User’s Guide 2.4 Setting the TotalMedia™ software. 2.4.1 Using Analogy TV system 1. Use remote control or mouse to select TV function. 2. Click “Next” button to continue. 3. Select your region then click “Next” button again. 4. Select “Trident capture” and click “Next” button. - Page 10 UAD880 User’s Guide 5. Select audio device and click “Next” button. 6. Find your TV service then select the TV signal and click “Next” button. 7. Click “Start” button to scan channel automatically. 8. Click “Next” button when scanning finish. 9.
-
Page 11: Using Digital (Dvb-T) Tv System
UAD880 User’s Guide 10. Click “Finish” button. 11. Watch and enjoy your high quality digital 2.4.2 Using Digital (DVB-T) TV system 1. Use remote control or mouse to select TV function. 2. Click “Next” button to continue. 3. Select your region then click “Next” button again. - Page 12 UAD880 User’s Guide 4. Select “Trident DTV Tuner” and click “Next” button. 5. Click “Start” button to scan channel automatically. 6. Click “Next” button when scanning finish. 7. Click “Next” button to continue. 8. Click “Finish” button. 9. Watch and enjoy your high quality digital For detailed information and operations of the TotalMedia™...
-
Page 13: Chapter 3: Using The Remote Control
UAD880 User’s Guide Chapter 3: Using the Remote Control 3.1 Installing Batteries Please draw out the plastic from remoter control. 3.2 Remote controller functions 1. ON/OFF: Open/Close TotalMedia program. 2. Back: Cancel the setting 3. Mute: click to mute the audio 4. - Page 16 2007/05/09 Version: 0.91...
Need help?
Do you have a question about the UAD-880 and is the answer not in the manual?
Questions and answers