Page 2
DR5039 LocoNet B ‐> CDE Adapter LocoNet B aanslui ng LocoNet B connec on LocoNet B Anschluss LocoNet B connexion CDE Uitgang 1 CDE Uitgang 3 CDE output 1 CDE output 3 CDE ausgang 1 CDE ausgang 3 CDE sor e 1...
The DR5039 is a universal adapter to connect so‐called CDE boosters to central‐units with a LocoNet‐B output. The DR5039 has 4 different connec vity op ons for CDE boosters. Each of the 4 connec ons is fi ed with its own short‐circuit monitoring and no fica on.
Page 4
Descrip on du produit De DR5039 est un adaptateur universel perme ant de raccorder ce qu’on appelle les amplificateurs CDE aux centrales avec une sor e LocoNet‐B. Le DR5039 possède 4 différentes possibilités de connexion pour les amplificateurs CDE. Chacune des 4 connexions possède sa propre surveillance et communica on de court‐circuitage.
Page 5
Configura on The DR5039 is set at the factory so that all of the control units tested (Lenz™ LZV100, Roco™ Mul Maus™, Roco™ Z21™, Roco z21 ™ (white), Intellibox™, TwinCenter™ and DR5000) work out of the box. If you have a control unit that supports LNCV programming, you can configure the following on the DR5039:...
Page 6
Le DR5039 est configuré à l’usine de façon à fonc onner immédiatement avec toutes les unités de contrôle testées (Lenz™ LZV100, Roco™ Mul Maus™, Roco™ Z21™, Roco z21™ (blanc), Intellibox, TwinCenter and DR5000). Si vous avez une unité centrale qui fonc onne en programma on LNCV, vous pouvez configurer le DR5039 de la façon suivante : LNCV’s...
Page 7
DR5039 LocoNet B ‐> CDE Adapter www.digikeijs.com...
Page 8
DR5039 LocoNet B ‐> CDE Adapter www.digikeijs.com...
Need help?
Do you have a question about the DR5039 and is the answer not in the manual?
Questions and answers