i3 International Ax68R Series Quick Installation Manual

3MP/6MP Infrared Outdoor IP 360-degree Fisheye Camera
SAFETY
When installing your Ax68R/Ax78R camera be sure to avoid:
• excessive heat, such as direct sunlight or heating appliances
• contaminants such as dust and smoke
• strong magnetic fields
• sources of powerful electromagnetic radiation such as radios or TV transmitters
• moisture and humidity
• areas with mechanical vibrations
• fluorescent lamps or objects that reflect light
• unstable light sources as this may cause flickering
• temperatures below -30° Celsius or -22° Fahrenheit and above 60° Celsius or 140°
Fahrenheit.
POWER SUPPLY
Ax68R/Ax78R Power consumption requirement: 12V DC / PoE (IEEE 802.3af).
Ensure the supplied voltage meets the power consumption requirements of this camera
before powering the camera on. Incorrect voltage may cause irreparable damage to the
video camera and will effectively void the camera warranty.
PoE power is supported.
CLEANING
• For maximum optical clarity, the camera dome or lens must remain clean. Use a soft,
dry cloth to remove finger prints or dust from the dome cover.
• Use a blower to remove dust from the lens.
• Clean the body with a soft, dry cloth. If it is very dirty, use a cloth dampened with a
small quantity of neutral detergent, then wipe dry.
• Do not use volatile solvents such as alcohol, benzene, or thinners, as they may
damage the surface finishes.
SERVICING
To avoid electrical shock and to preserve the product warranty, DO NOT disasemble the
camera. Refer servicing to qualified personnel only.
PACKAGE CONTENTS
Ensure that the items received match those listed on the order form and the packing slip.
In addition to this manual and a fully assembled camera, the dome camera packing box
includes:
1. Waterproof RJ45 connector (x1 package with 4 pcs).
Use to protect RJ45 cable connector from the elements.
2. Plastic Anchor x4
3. Round Head Screw (Tapping Type) x4
4. Surface Mount template x1
1
Please Note: Visit www.i3international.com to view and download the full User Manual
for this camera. Also available for download is the AnnexxusConfigurationTool or ACT
program used to locate and configure your cameras with your SRX-Pro software. This
program is already installed in SRX-Pro v3.3.3.69 and higher. Please contact our Technical
Support team if you have any questions or concerns regarding camera installation or you
require software services or support. Technical support can be reached by email at:
support@i3International.com or by phone toll free 1.877.877.7241.
i3-TRNG-CAMS-Ax68R/78R-QIG.indd
1
TOP
Drill Template
Hole A : for cables routed through the ceiling
3
2
Screw hole 1 : for Mounting Base
1
Quick Installation Guide
CAMERA PARTS AND DEFINITIONS,
DISASSEMBLING THE CAMERA
Ax68/Ax78 Camera Side view,
with camera cover attached
Ax68/Ax78 Camera, Top view, with camera
cover attached. Lift the safety lock screw cover
to reveal the safety lock screw (1). Use a Phillips
screwdriver to loosen the lock screw, then grip
the camera cover and flex on one side, towards the
center. Lift UP to remove.
Camera module with camera cover removed.
Use a Phillips screwdriver to remove the SD card panel cover (2).
to expose microSD card slot (3) and the RESET pin hole (4).
Rubber gasket is provided for an airtight seal and moisture protection (5).
6
7
1
8
9
4
Camera module with camera cover removed.
Ax68R/Ax78R-series
3
4
2
5
6. Built-in speaker
10
7. MicroSD card slot
11
Insert a micro SDHC card
for backup/emergency
12
recording and/or storage.
RESET pin hole
Use a sharp object to Press
the Reset button, the cam-
era will be rebooted.
13
8. Light sensor for day/night
switching
9. IR LEDs x3
10. Camera cover lock screw
hole
11. Mounting screw hole/
slot x3
12. Camera cover clips x3
13. Built-in microphone
14
14. DC12V Power connector
15. RJ45 Network connector
15
(PoE supported)
Rev. 160808