Advertisement
PROBLEM
Sudden loss of flow.
Undue vibration or noise.
Pump switches on and off
rapidly.
Pump switches on and off when
no water is being drawn.
Pump does not switch off.
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack Sealey Limited
CAUSE
Loose or leaking connection to the
inlet pipe.
Suction head is too high and
causing cavitation.
Excessive flow of water.
Resistance in inlet pipeline.
Loose rotating component.
Installation of pump is not stable.
Air pocket in pump or pipeline.
Damaged impeller.
Low air pressure.
Membrane damaged.
Leak in output side.
Non-return valve faulty.
Pressure switch faulty.
No water at pump inlet.
Faulty impeller.
www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
SOLUTION
Check pipeline and correct.
Check suction head and lower the position
of the pump.
Decrease flow of water.
Check pipe and clean out as necessary.
Return to your dealer for repairs.
Stop pump and reposition.
Release drain plug in impeller housing to release air.
Return to your Sealey dealer for repair.
Check pressure.
Return to your Sealey dealer for repair.
Investigate and rectify.
Check and rectify.
Return to your Sealey dealer for repair.
Check for blockage.
Dismantle and investigate.
WEEE Regulations.
Dispose of this product at the end of its working life in compliance
with the EU Directive on Waste Electrical and Electronic Equipment.
When the product is no longer required, it must be disposed of in an
environmentally protective way. Contact your local solid waste
authority for recycling information.
01284 757500
01284 703534
WPB050 & WPB062S
www.sealey.co.uk
W e b
sales@sealey.co.uk
email
Issue: 2(I)- 22/12/15
Advertisement
