Page 2
FULL PART LIST 10 11 12” bass drum shell x 1pc 12” bass drum head x 2pcs Bass drum hoop x 2pcs 10” snare drum x 1pc 8” tom-tom x 1pc Drum throne – seat x 1pc 8” cymbal x 1pc Pair of drum sticks Bass drum lug x 6 sets 10.
Page 3
BASS DRUM Lug x 6 sets Drum head x 2pcs Bass drum shell x 1pc Spur x 2pcs Hoop x 2pcs Place the head with logo on the front side Loose one side of the tension rods of the bass drum Clamp the drum lugs onto the hoop and insert Place the hoop onto the drum head the rod through the positioning hole...
Page 4
Place the card board on top of the lugs Place the other head on the back side of and turn the shell up side down the bass drum Place the hoop onto the drum head Screw all tension rods to the lugs (NOTE: DO NOT FULLY TIGHTEN) Use the drum key to tune the tension rods Insert the bass drum spurs...
Page 5
CYMBAL & TOM-TOM Tom-tom x 1pc Cymbal & tom bracket x 1pc Tom holder x 1pc Cymbal x 1pc Cymbal holder x 1pc Insert the bracket into the adapter on the bass Insert the tom holder through the bracket drum shell and connect to the tom-tom Place the cymbal onto the cymbal holder Connect the cymbal holder to the bracket...
Page 6
BASS DRUM PEDAL Bass drum pedal x 1pc Bass drum beater x 1pc Clamp the pedal to the bass drum hoop Connect the beater to the pedal Tighten the pedal clamp...
SNARE DRUM Snare drum x 1pc Snare stand feet x 1pc Snare stand basket x 1pc Pull open the legs and connect with the basket arm to appropriate height Open the basket and place the snare drum...
Page 8
DRUM THRONE Seat x 1pc Feet x 1pc Height adjusting tube x 1pc Insert the height adjusting tube to Pull open the feet appropriate height Place the seat onto the tube...
Need help?
Do you have a question about the TIM JR 3/12B and is the answer not in the manual?
Questions and answers