Plustek OpticSlim 2610 Quick Installation Manual

OpticSlim 2610
Quick Installation Guide
Read these instructions before using your product.
1
Install software and connect the scanner
Step 1 Connecting
Connect scanner to computer.
2
Scan a document & book
Scan Document
1.
Place documents in scanner
LTR A4 B5
OCR Button
Useful Tips:
For a multi-page document please check the box
Please scan the QR code in the title bar to see more software video tutorials.
Step 2 Installing
Insert Setup/Application disk into DVD-ROM driver.
Note: If your computer does not have a DVD-ROM
please download driver from Plustek website.
www.plustek.com Support & Downloads

Drivers & Downloads Search for SmartOffice

PS30D
2.
Close cover and press scan button
B5 A4 LTR
Select the desired
OCR language.
Continuous Scans
For product detailed information, please visit:
Follow on-screen instructions to install all software.

Scan Book
1.
Email Button
Useful Tips:
1. File Format (Default) : PDF
(Note: Click Configure button to activate Generate one TIFF / PDF file for all pages)
2. Scan Mode (Default): Grayscale
3. Recommended Resolution: 200 dpi
For software video tutorials, please visit:
Scan me
Step 3 Calibrating
After the software is installed, you will be prompted
to perform the scanner calibration.
Place the book on the glass.
Select desired file format
from the dropdown list. This
selection should match with
the selection of Scan Mode.
P/NO.: 17-07-2BB1020-C
Scan me