Download Print this page
WAC Lighting dweLED 911 Series Installation Instructions

WAC Lighting dweLED 911 Series Installation Instructions

Outdoor wall sconce

Advertisement

Quick Links

INSTALLATION
911-Outdoor Wall Sconce
WS-W14911/WS-W14911F
CAUTION: TO PREVENT ELECTRICAL SHOCK, ENSURE ELECTRICITY HAS BEEN TURNED OFF AT THE CIRCUIT BREAKER
BEFORE BEGINNING.
-
Read all instructions before installing.
-
System is intended for installation by a licensed electrician in accordance with the National Electrical Code (NEC) and local
regulations.
-
When handling the fixture, do not apply pressure to the LEDs. Hold the fixture by the base only.
-
Retain installation instructions for future maintenance reference.
WARNING: All parts must be used as indicated in these instructions. This product is designed for use only with the supplied parts
and/or accessories designated for use by dweLED. Substitution of parts or accessories not designated for use with this product by
dweLED could result in personal injury or property damage, and will void the warranty. Contact an authorized dealer or the
manufacturer if any parts are damaged or missing.
MAINTENANCE NOTE: Coastal conditions may cause mineral and residue build-up on the fixture. We recommend that customers in
coastal areas clean all external surfaces of the fixture once every two weeks with a wet cloth.
MISE EN GARDE: Pour éviter tout choc électrique, assurez-vous que le disjoncteur soit mis hors tension avant de
commencer.
-
Lisez toutes les instructions avant l'installation.
-
Le système doit être installé par un électricien licensié conformément au code national de l'électricité (NEC), et également
aux règlements locaux.
-
Lors de la manipulation du luminaire, n'appuyez pas sur les LED. Tenez-le uniquement par la base.
ATTENTION: Toutes les pièces doivent être utilisées comme indiqué dans ces instructions. Ce produit est conçu pour être utilisé
seulement avec les pièces et/ou accessoires fournis pour être utilisés avec les produits dweLED. Remplacer des pièces ou
accessoires non conçus pour ce produit dweLED pourrait causer des dommages corporels ou matériels et pourrait également causer
l'annulation de la garantie. Veuillez contacter un revendeur autorisé ou le fabricant si des pièces manquent ou sont endommagées.
NOTE D'ENTRETIEN: Les conditions côtières peut causer une accumulation de minéraux et de résidue sur le luminaire. Nous
recommendons aux clients qui resident dans les zones côtières de nettoyer toutes les surfaces externes du luminaire une fois toutes
les deux semaines avec un chiffon humide.
HARDWARE
dweLED
www.dweLED.com
Phone (800) 526.2588 • Fax (800) 526.2585
G0
dweLED retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
INSTRUCTIONS
A
Wire Connector
Qty: 3pcs+1 Extra
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone (516) 515.5000 • Fax (516) 515.5050
C
B
Mounting Screw
Silicon Gasket
Qty:1 Extra
Qty:1 Extra
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone (800) 526.2588 • Fax (800) 526.2585
Feb 2019
1

Advertisement

loading

Summary of Contents for WAC Lighting dweLED 911 Series

  • Page 1 INSTALLATION INSTRUCTIONS 911-Outdoor Wall Sconce WS-W14911/WS-W14911F CAUTION: TO PREVENT ELECTRICAL SHOCK, ENSURE ELECTRICITY HAS BEEN TURNED OFF AT THE CIRCUIT BREAKER BEFORE BEGINNING. Read all instructions before installing. System is intended for installation by a licensed electrician in accordance with the National Electrical Code (NEC) and local regulations.
  • Page 2 INSTALLATION INSTRUCTIONS 911-Outdoor Wall Sconce WS-W14911 Fig.1 Back Plate Dimensions Mounting Screw Junction Box Silicon Gasket Wire Connector Mounting Back P late Junction Box Screw PREPARATION Shut off the power at the circuit breaker and remove existing fixture, including the crossbar. Carefully unpack your new fixture and lay out all the parts on a clear area.

This manual is also suitable for:

Dweled ws-w14911fDweled ws-w14911