Unicol PZW TILTING MOUNT Installation Instructions

INSPECT THE UNIT BEFORE INSTALLING
WARNING: Watch for pinch points. Do not put your fingers between movable parts. Do not tamper with or
dis-assemble the spring loaded arms of the PZW.
1. Carefully inspect the PZW Tilting Mount or PZX Flat Mount for shipping damage. If any damage is
apparent, call your carrier claims agent and do not continue with the installation until the carrier has
reviewed the damage.
NOTE: Read all instructions before starting the installation. The PZW differs from the PZX in that the PZW
Screen Arms have an additional spring loaded arm. Both units are assembled in the same way.
2. Lay out components to ensure you have all the required parts before proceeding (see Parts List on
Page 2).
CAUTION: To prevent damage to the PZW / PZX study all instructions and illustrations before you begin
the installation. Failure to do so could render the Warranty for the mount and the equipment that attaches
to it null and void. Pay particular attention to the "Warnings" displayed in these Instructions.
The maximum weight to be installed on the PZW / PZX wall mount is 60 Kg (132 Lbs).
The PZW / PZX wall mount is designed to be installed onto walls or Unicol screen stands and trolleys.
The structure to which the wall mount is anchored must be capable of supporting five times the total
weight of the mount and all attached equipment. We recommend installation by a Qualified Tradesperson,
using masonry plugs or other reliable fixings to ensure safe installation. Consult your builder or architect if
in doubt.
If you have any questions about the installation, contact Unicol +49 (0)9131 940 580-0.
+49-(0)9131-940 580-0

INSTALLATION INSTRUCTIONS

UNIVERSAL SCREEN MOUNT
CODE: PZW TILTING MOUNT, PZX FLAT MOUNT & KPL KIT
Page 1
www.unicol.de