Table of Contents
Advertisement
Quick Links
MANUFACTURER'S INSTRUCTIONS
•
N° 390526NI
READY-TO-INSTALL
9
INDUCTION
Part A: Technical data
Part B: Installation instructions
•
Installation and repairs must be carried out by personnel approved by the manufacturer and in
•
If any modifications are made the manufacturer can accept no responsibility whatsoever.
•
These appliances must be used in a well-ventilated area.
Read the notice carefully before installation.
•
The unit must be kept on its base for handling until it is in its final location.
5 KW
- WARNING -
accordance with current regulations and standards.
& WOK
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bonnet B-CAP.IN5
Summary of Contents for Bonnet B-CAP.IN5
- Page 1 READY-TO-INSTALL 5 KW & WOK INDUCTION MANUFACTURER’S INSTRUCTIONS Part A: Technical data Part B: Installation instructions - WARNING - • Installation and repairs must be carried out by personnel approved by the manufacturer and in accordance with current regulations and standards. •...
- Page 2 2.1 General requirements ..………..……….……...….……...…...…….. 5 2.2 Handling ……..……..……………………………………………..… 5 2.3 Unpacking …..…...…………..………………………..……………..5 2.4 Installation ….……….……...…………………………………………. 5 Installation: Connections ….………………………………………...….…. 6 3.1 Electrical connections ….……………..…...……...………..…….…. BONNET CIDELCEM GRANDE CUISINE Siége social: Rue des Frères Lumière - Z.I Mitry Compans 77292 MITRY MORY Cedex...
- Page 3 Connection through 3-pole + earth socket (not supplied) compliant to the EN 60.083 standard The equipment is fitted with a 1.5 m long supply cable. Non contractual document Edition 11/2005 – 3BE0322 BONNET CIDELCEM GRANDE CUISINE Siége social: Rue des Frères Lumière - Z.I Mitry Compans...
- Page 4 Connection through 3-pole + earth socket (not supplied) compliant with the EN 60.083 standard. The equipment is fitted with a 1.5 m long supply cable Non contractual document Edition 11/2005 – 3BE0323 BONNET CIDELCEM GRANDE CUISINE Siége social: Rue des Frères Lumière - Z.I Mitry Compans...
-
Page 5: Identification Plate
In any correspondence about your equipment please quote: - The model number (Model.) - The serial number (Fab.Nr.) - The date (Date). Identification plate Location of the identification plate BONNET CIDELCEM GRANDE CUISINE Siége social: Rue des Frères Lumière - Z.I Mitry Compans 77292 MITRY MORY Cedex... - Page 6 Remove the equipment from its packaging. Pull and unwind completly the supply cable of the appliance. Leave a distance of 50 mm from any vertical wall. BONNET CIDELCEM GRANDE CUISINE Siége social: Rue des Frères Lumière - Z.I Mitry Compans...
- Page 7 The installation must comply with current applicable national legislation (for France, standard NF 15.100). The appliance must be connected to the earth. The manufacturer cannot be held responsible if these instructions are not followed. BONNET CIDELCEM GRANDE CUISINE Siége social: Rue des Frères Lumière - Z.I Mitry Compans 77292 MITRY MORY Cedex...
Need help?
Do you have a question about the B-CAP.IN5 and is the answer not in the manual?
Questions and answers