Page 2
TOOLS REQUIRED Phillips Screwdriver Channel Locks Teflon Tape Tubing Cutter Regular Screwdriver Plumbers' Putty or Caulking 5/32" Hex Wrench Adjustable Wrench ROUGHING-IN DIMENSIONS 3/4" NPT OUTLETS 3/4" NPT INLETS 5-7/8" 32" TO 42" 48" TO 54" FOR BATH/SHOWER FOR SHOWER ONLY AND BATH FILLER (OPTIONAL) (OPTIONAL)
Page 3
Turn off hot and cold water CAUTION ROUGHING-IN THE VALVE supplies before beginning. Prepare water supplies per ROUGHING-IN DIMENSIONS. Make sure the finished wall is between the minimum 1-11/16" and maximum 2-1/2" rough dimension. Install VALVE (1) at indicated height and depth. Make sure the "TOP" marking on the PLASTER COLD For support, use pipe BRACES (3) secured to wooden braces.
Page 4
JADO will not be liable for labor or other costs relating to the sale, installation, or replacement of their products. JADO BATHROOM AND HARDWARE MFG. CORP. In the event of a defect in any JADO product covered by this warranty, the product must be returned to the dealer where originally purchased along with proof of purchase.