8. Level 3 Repair
8-4-13. 13M CAMERA
.
Main Camera function does not work
Check the Camera
connector on
Main PBA
Check the voltage
C7018 = 1.8V
C7012, C7028 = 2.8V
C7010 = 1.2V
C7009 = 1.8V
C7011 = 2.8 V
C7013 = 2.8 V
Replace the camera
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
Yes
No
Yes
Yes
module
Yes
END
Reconnect the 13M Cam module on HDC7001
No
Resolder C7018, C7012, C7028, C7010, C7009,
or Replace the UCP400
http://www.easy-firmware.com
C7011, C7013