Advertisement
Quick Links
Q Option Upgrade Kit Installation Instructions
QSRK5267 / QSVK5268 Conversion Kits
(1) Disassemble Channel and Touchbar
Slide filler out to allow access
Loosen set screw
Note: Hex-dogging rim assembly is shown as example only.
1.1
Remove 2 screws on the bottom
side of the chassis/channel
(#8-32MS)
1.2
1.3
1.4
1.5
Remove 4 touchbar screws
(#8-32MS, 2 screws per side)
Q Option Upgrade Kit Installation Instructions
QSRK5267 / QSVK5268 Conversion Kits
DRWG
05269-11-000
Page 1 of 3
DATE
REV
12/4/2008
B
Advertisement
Related Manuals for Stanley QSRK5267
Summary of Contents for Stanley QSRK5267
- Page 1 Q Option Upgrade Kit Installation Instructions QSRK5267 / QSVK5268 Conversion Kits (1) Disassemble Channel and Touchbar Remove 2 screws on the bottom side of the chassis/channel (#8-32MS) Remove 4 touchbar screws (#8-32MS, 2 screws per side) Slide filler out to allow access...
- Page 2 Dress harness clear of lever arm and lower lip to avoid pinching. .925” Q Option Upgrade Kit Installation Instructions Route harness up through lock side filler as QSRK5267 / QSVK5268 Conversion Kits Page 2 of 3 shown. Keep clear of moving parts and cover. DRWG...
- Page 3 Note: ELR assembly is shown as example only. Q Option Upgrade Kit Installation Instructions (4) Reassemble device by reversing steps 1.1 to 1.5 QSRK5267 / QSVK5268 Conversion Kits Page 3 of 3 DRWG DATE Note: Refer to EXQ trim installation instructions for...