Do you have a question about the Platinum 6000 Series and is the answer not in the manual?
Questions and answers
Jose Antonio
July 4, 2025
NO SALE AIRE DE LOS 4 ORIFICIOS SOLO DE 1
Subscribe to Our Youtube Channel
Summary of Contents for Sizewise Platinum 6000 Series
Page 1
Platinum 6000™ Quick Reference Guide Current This is the international keypad with curre color applied. For Rev. 2 keypad, see Part No. 27650013...
Page 2
Keypad Controls Power/Standby: Power On (Green LED); Standby (Amber LED) Mode: Select between Therapy Modes Autofirm: max inflate for transferring patient Alternation Therapy Alternation Therapy with Microclimate Management/Low Air Loss Immersion Therapy with Microclimate Management/Low Air Loss Immersion Therapy Cycle Time: for Alternation Therapy only Alarm Silence: press to reset alarms Power Fail Warning Low Pressure Warning...
Page 3
Operating Instructions 1. Press and hold . Green LED indicates pump is on; Amber LED indicates standby mode. 2. Press until is selected to autofirm surface; transfer patient to surface. Setting Therapy Mode 1. Use to select Therapy Mode. Alternation Therapy (no Microclimate Management/Low Air Loss) Alternation Therapy with Microclimate Management/Low Air Loss...
Page 4
Patient Specific Adjustments To customize the mattress for your patient, follow these three steps: Patient Height: Select and use until patient’s height is shown on display. Patient Weight: Select and use until patient’s weight is shown on display. Comfort Settings: Select to override auto pressure settings.
Page 5
Changing Units of Measurement The pump’s default settings are in standard units. Change to Metric Units: 1. Put the pump in standby by pressing 2. Press and hold . Keep buttons depressed until all lights flash and you hear six beeps. 3.
Page 6
(amber LED). 3. If mattress is to be disconnected from pump, place Transport Cap over hose connections. This card is not meant to replace product user manual. For complete manual, contact Sizewise. sizewise.com 800-814-9389 OPS-0047A-1018 27650011, Rev. 4.0...
Need help?
Do you have a question about the Platinum 6000 Series and is the answer not in the manual?
Questions and answers
NO SALE AIRE DE LOS 4 ORIFICIOS SOLO DE 1