DirekTronik Y-mouse Manual

Keyboard and mouse adapter for usb

Table of Contents

Download this manual

info@direktronik.se

Tel: 08-52 400 700

Installing Your Y-mouse Keyboard & Mouse Adapter for USB

For Mac Systems:

1. The Y-mouse Keyboard and Mouse Adapter for USB uses a single USB port, make sure your

computer has a USB port.

2. Connect two mice, two keyboards or a mouse and a keyboard to the

Y-mouse. The devices must be able to use a PS/2 port. NOTE: Adapters that change keyboards from AT

style DIN-5 (5-pin) to 6-pin PS/2 may be used for keyboards; however, mouse-type devices must be

designed to work in the PS/2 port.

3. Plug the Y-mouse Keyboard and Mouse Adapter for USB into the USB port on your computer.

Incidentally, there are usually two USB ports – either will work.

4. Installation is now complete. No message boxes are required. See Advanced Options to customize

the Y-mouse for Mac keyboards. Test the new keyboard and/or mouse in the software program of your

choice.

Keyboard and Mouse Adapter for USB

Table of Contents

Need help?

Do you have a question about the Y-mouse and is the answer not in the manual?

Page 1 2. Connect two mice, two keyboards or a mouse and a keyboard to the Y-mouse. The devices must be able to use a PS/2 port. NOTE: Adapters that change keyboards from AT style DIN-5 (5-pin) to 6-pin PS/2 may be used for keyboards; however, mouse-type devices must be designed to work in the PS/2 port.
Page 2 PC and the <control>, <command> and <alt-option> keys on a Macintosh are not the same as on PC keyboards. To change the Y-mouse settings to Macintosh, hold down the <esc> key, tap the <w> key and release the <esc> key. See <Esc> <w> in the section on Special Settings.
Page 3 Special Setting to take effect. <Esc> <y> – Changes the Scroll Lock key on a PC to a USB Scroll Lock key (the Y-mouse default setting is for Macintosh computers, which use the parallel key on Macs as a power-on key).
Page 4: Limited Warranty
P.I. Engineering at the time of original purchase, for one year as evidenced by a copy of the purchase receipt. Under this warranty, P.I. Engineering will, at its sole option, repair or replace any Y-mouse product which is defective, provided that you are responsible for (i) the cost of transportation of the product to P.I.