Nexa NL-1800 Manual

Using the Nexa NL-1800 with Library Automation Systems
It is advised that before any attempt is made to use the NL-1800 wireless scanner the contents of the
supplied package should be inspected so that the purpose and use of each item is understood.
Supplied Items shown below.
The NL-1800 Wireless Scanner already
has a rechargeable Li-Ion battery fitted
within the handle of the scanner. The
enclosed USB charging cable is used to
recharge the battery when required.
The NL-1800 USB receiver must be
connected to a spare USB port on the
host computer and provides the path of
wireless communication with the NL-1800
wireless scanner and the host computer.
While it is possible to operate the
wireless scanner with the USB receiver
directly connected to the host computer's
USB port, a USB docking station with
extension cable is provided so that the
USB receiver can instead be fitted to the
docking station. The USB receiver can
then be elevated to a prone and visible
position to enhance the wireless range.
A safety strap or lanyard is supplied and
should be attached to the NL-1800
wireless scanner. As a precautionary
measure during use the strap can be
wrapped around the user's wrist to
prevent damage to the scanner from
possible accidental drops.
Connect the USB receiver to the computer.
Prior to undertaking any other action the USB Receiver should be connected to the host computer. If the host
computer is a laptop then connecting the USB receiver directly to a spare USB port is recommended. If
however the host computer is a desktop or larger computer then it is advised that the USB receiver is first
connected to the USB docking station and then the docking station is connected to a working USB port on
the host computer.
The USB receiver is known as a HID device meaning that data sent from the receiver to the computer is
treated the same way as keyboard entry. What this also means is that when the USB receiver is first
connected to the computer's USB port the computer operating system recognises this and automatically
accommodates for it. This is often referred to as "Plug & Play" and means that NO additional software or
device driver software is required, the widespread growth and adoption of many USB devices is directly
attributable to this simple and user-friendly method of connecting computer peripherals.
Once you have connected the USB receiver it should be recognized by the host computer and within less
than 10 seconds the receiver will double flash red to report that the initialization is complete and the wireless
scanner is ready for use with the USB receiver.
Wake up the NL-1800 wireless scanner.
When the NL-1800 wireless scanner is first used it will require waking up, to do this simply press and release
the trigger on the scanner to activate it. A blue light on the head of the scanner will illuminate when the
scanner is ready for use.
After periods of non-use (default of 10 minutes) the wireless scanner will enter a sleep mode to preserve
battery life. Waking up is the same as first initialization, simply press and release the trigger on the scanner.