American Builder HW2322 Manual

2-in-1 wet & dry vacuum with air compressor

Advertisement

HW2322
2-IN-1 WET & DRY VACUUM WITH AIR COMPRESSOR

SET INCLUDES:

(A) Auto Vacuum/Air Compressor
(B) Brush Nozzle
(C) Crevice tool
(D) Rubber Nozzle
(E) 3pcs Inflatable Nozzles
(F) Flexible Air Hose

VACUUM OPERATING INSTRUCTIONS

1. Make sure the Vacuum/Compressor switch is set to the middle "OFF" setting.
2. Turn the car ignition on.
3. Insert the DC12V adapter into the cigarette lighter of the car.
4. Slide the Vacuum/Compressor switch forward to the "Vacuum" setting and begin vacuuming.

INCLUDED ATTACHMENTS

To use the included attachments: Brush Nozzle (B), Crevice Tool (C) and Rubber Nozzle (D).
Insert the desired tool into the front chamber of the reservoir cover and begin vacuuming.

CLEANING AND CARE

Clean the filter and reservoir regularly. Only a clean filter will ensure maximum suction power.
1. To clean out the filter, press the reservoir cover release button and pull the filter cover off.
2. Proceed to pull the filter out from the vacuum and discard debris.
3. Wash filter and reservoir under running water
4. Securely replace the filter and cover back on to the vacuum.
F
B
D
E
C
E
Reservoir cover
Vacuum/Compressor
release button
switch
A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HW2322 and is the answer not in the manual?

Questions and answers

Summary of Contents for American Builder HW2322

  • Page 1 HW2322 2-IN-1 WET & DRY VACUUM WITH AIR COMPRESSOR Reservoir cover Vacuum/Compressor release button switch SET INCLUDES: (A) Auto Vacuum/Air Compressor (B) Brush Nozzle (C) Crevice tool (D) Rubber Nozzle (E) 3pcs Inflatable Nozzles (F) Flexible Air Hose VACUUM OPERATING INSTRUCTIONS 1.
  • Page 2 HW2322 2-IN-1 WET & DRY VACUUM WITH AIR COMPRESSOR COMPRESSOR OPERATING INSTRUCTIONS 1. Make sure the Vacuum/Compressor switch is set to the middle “OFF” setting. 2. Remove the plastic valve cover from the tire you wan to inflate. 3. Screw one end of the flexible air hose (F) on to the compressor, and screw the other end on to the valve of the tire you want to inflate.

Table of Contents