1. Manuals
  2. Brands
  3. aplombtech Manuals
  4. Network Router
  5. SMART SWITCH
  6. Manual

aplombtech Smart Router Manual

Hide thumbs Also See for Smart Router:
1
2
3
4
5
6
7

Advertisement

Table of Contents

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Smart Router and is the answer not in the manual?

Questions and answers

Related Manuals for aplombtech Smart Router

Summary of Contents for aplombtech Smart Router

  • Page 2 AplombTech Smart Router AP Mode (Version 1.0) P a g e...
  • Page 3 AplombTech Smart Router AP Mode You can use multiple SmartRouters to extend the coverage of your home network using AP (Access Point) mode. For this purpose, you need at-least 2 SmartRouters. Let's name the main router as Master and the extended router as Slave. Power on the Slave router and connect to it via LAN or WiFi.
  • Page 4 P a g e...
  • Page 5 For example, the Master router provides IP from 192.168.31.100 192.168.31.200 DHCP Clients. Then the IP can be safely set as the LAN IP Address of Slave 192.168.31.201 Router. Click and then it will take some time for the router to apply the changes. You will be Apply disconnected from the Slave router as the LAN IP Address has been changed.
  • Page 6 Then connect to the Master router via LAN or WiFi then browse to the IP or the one you specified earlier. Now perform the following tasks. 192.168.31.201 • Login to it and go to > menu. Change the SSID to match the WiFi SSID Wireless Basic of Master.
  • Page 7 Do the same if you have multiple routers to be setup as AP. Make sure that each router has unique IP Addresses that does not conflict with the DHCP Pool of the Master router. P a g e...

Table of Contents