Topcom 1300 DUO PACK User Manual page 7

The Speaker Volume can be adjusted using
LCD.
The unit is continuously in the RECEIVE mode when the unit is ON and not transmitting. When you
receive a signal on the current channel, the RX icon is displayed.
• Press and hold
• Hold the unit in a vertical position with the MICROPHONE 10 cm from the mouth and speak into the
microphone.
• Release
The PMR has 8 available channels.
To change channels:
• Press
• Press
• Press
PTT
NOTE: Any PMR set on the same channel can receive and listen to the conversation.
You can use the MONITOR feature to check for weaker signals in the current channel.
• Press button for normal monitoring .
• Press and hold . After 5 seconds you can release the button. You are now continuous monitoring the channel
until you press again.
CHANNEL SCAN performs searches for active signals in an endless loop from channel 1 to 8.
• Press and hold
• Release the buttons.The channel on the display changes as it scans through the channels.
• When an active signal (one of 8 channels) is detected, CHANNEL SCAN pauses and you will hear the
active signal.
• When an active signal (one of 8 channels) is detected, press
and continue to search for another active channel
• Press
PTT
scan.
TOPCOM TWINTALKER 1300 DUO PACK
to TRANSMIT.
PTT
when you have finished transmitting.
PTT
once, the current channel number flashes on the LCD Screen.
or to change the channel.
to confirm the channel selection and return to NORMAL mode.
and for 2 seconds.
to communicate through the active signal channel or press
TOPCOM TWINTALKER 1300 DUO PACK
/ . The Speaker Volume level is displayed on the
or to bypass the current channel
to deactivate channel
7