Well PROJ-LSR-RG6ID-WL User Manual

USER'S MANUAL
Indoor Decorative Laser Light Projector
Model:
PROJ-LSR-RG6ID-WL
Thank you for choosing WELL. Please read carefully the following instructions and keep them within
reach.

Specifications:

Input Voltage: 220 -240V AC, 50-60Hz
Output: 5V 1A 5W AC Adapter
Laser source: Red-100mw@650nm/ Green-20mw@532nm ( Class II Laser product)
Material: Al; IP20
Working temperature: 5℃ ~ 35℃
CAUTION! Performance of procedures other than those specified herein may result in hazardous
radiation exposure.
Class II laser products can be hazardous when directly viewed.
This laser is certified as a class II, laser product. Avoid direct viewing of class II laser energy. For
reference the FLPPS requirements for demonstration laser products like laser pointers are limited to
class II levels of laser energy. This product uses diffractive optics to scatter the beam energy. This
scattering effect causes the energy concentration to drop below the exposure limits for momentary or
accidental viewing at a relatively short distance from the laser aperture. This laser display device
incorporates a class II laser system which, by itself, maybe hazardous However, this laser display device
incorporates a protective housing and diffractive holographic optics in the machine's design such that
there is no exposure or human access to the laser radiation during operation or maintenance above
the class II limits, Each individual laser beam's power is less than 5mw, Which is about an average laser
pointer.