Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Logic IO CAM-100
- Page 1 CAM-100 – Technical Manual 1.01 CAM-100 Technical Manual Version 1.01...
-
Page 2: Introduction
CAM-100 camera module designed for the RTCU X32 units. For information on the high- level programming of the CAM-100, please refer to the RTCU IDE documentation. The CAM-100 extends the capability of the RTCU platform with the ability to take JPEG compressed snapshots. Snapshots can be taken in four different resolutions. -
Page 3: Table Of Contents
CAM-100 – Technical Manual 1.01 Table of Contents Introduction ..........................2 Table of Contents ........................3 Graphical view ........................4 Installation..........................5 MX2i Pro/Pro+ and DX4 Pro Connection .................5 AX9 Pro Connection......................5 Lens adjustment .......................6 Bracket ..........................7 Specifications........................8 Appendix A ..........................9 Page 3 of 10 Logic IO ApS. -
Page 4: Graphical View
CAM-100 – Technical Manual 1.01 Graphical view Figure 1: Front and backside view Page 4 of 10 Logic IO ApS. Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com Denmark www.logicio.com / www.rtcu.dk... -
Page 5: Installation
AX9 Pro Connection The CAM-100 is delivered with the same 3 meter cable as for MX2i and DX4, but there isn’t a 6-poled tyco connector for easy-to-plug. The color coded 4 cables need to be connected to the AX9 manually. -
Page 6: Lens Adjustment
CAM-100 – Technical Manual 1.01 Lens adjustment After the CAM-100 is placed correctly, the focus needs adjustment. This is done by turning the lens carefully left or right manually, depending on the distance to the objective to focus Figure 2: Lens adjustment Page 6 of 10 Logic IO ApS. -
Page 7: Bracket
The combination of the bracket and the way the CAM-100 is fastened to the bracket makes it possible to install the CAM-100 so that any angle can be achieved. The metal bracket only requires two screws for mounting the CAM-100 on a wall, ceiling or anywhere else the application requires. -
Page 8: Specifications
CAM-100 – Technical Manual 1.01 Specifications Page 8 of 10 Logic IO ApS. Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com Denmark www.logicio.com / www.rtcu.dk... -
Page 9: Appendix A
CAM-100 – Technical Manual 1.01 Appendix A Figure 4: Area overview Page 9 of 10 Logic IO ApS. Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com Denmark www.logicio.com / www.rtcu.dk... - Page 10 CAM-100 – Technical Manual 1.01 Figure 5: Room overview Page 10 of 10 Logic IO ApS. Ph: (+45) 7625 0210 Holmboes Allé 14 Fax: (+45) 7625 0211 8700 Horsens Email: info@logicio.com Denmark www.logicio.com / www.rtcu.dk...
Need help?
Do you have a question about the CAM-100 and is the answer not in the manual?
Questions and answers