Download
Share
Print this page
Central Pneumatic 93458 Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Central Pneumatic Manuals
  4. Rivet Tools
  5. 93458
  6. Owner's manual & safety instructions

Central Pneumatic 93458 Owner's Manual & Safety Instructions

3/16" air hydraulic riveter
Hide thumbs

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2005 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
18e

Advertisement

loading
Need help?

Need help?

Do you have a question about the 93458 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Central Pneumatic 93458

Summary of Contents for Central Pneumatic 93458

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Table Of Contents

    2. Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The tool is able to create sparks resulting in the ignition of the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 93458...

  • Page 3: Safety

    3. Use only the lubricants supplied with the by qualified repair personnel. tool or specified by the manufacturer. 2. When servicing a tool, use only identical replacement parts. Use only authorized parts. Item 93458 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 Cubic Feet per Minute flow WARNING marking concerning SCFM at standard conditions Risk of Respiratory Injury. Wear NIOSH-approved dust mask/respirator. National pipe thread, tapered WARNING marking concerning Risk of Explosion. National pipe thread, straight Page 4 For technical questions, please call 1-888-866-5797. Item 93458...
  • Page 5 (such as tool as explained in this manual. tingling, numbness, and white or blue fingers), If abnormal vibration occurs, stop immediately. seek medical advice as soon as possible. SAVE THESE INSTRUCTIONS. Item 93458 For technical questions, please call 1-888-866-5797. Page 5...

  • Page 6: Specifications

    (Nosepiece change needed) Maximum Pull Force 2,800 lb. Components and Controls Head (11) Nosepiece Pin Cap (23) (1A, 1B, 1C, 1D) Pin Cap Trigger (40) Nut (22) Quick Connector (53) Page 6 For technical questions, please call 1-888-866-5797. Item 93458...

  • Page 7: Setup

    Item 93458 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8 Page 8 For technical questions, please call 1-888-866-5797. Item 93458...
  • Page 9 Item 93458 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10 2. Use the Wrench (36) to remove the (1A = 3/16″), (1B = 5/32″), (1C = 1/8″), (1D = 3/32″). old nosepiece and install the new one. Tighten the new nosepiece in place before use. Page 10 For technical questions, please call 1-888-866-5797. Item 93458...

  • Page 11: General

    Clean external surfaces of the tool with clean, dry cloth, and apply a thin coat of tool oil. Then store the tool indoors out of children's reach. Item 93458 For technical questions, please call 1-888-866-5797. Page 11...

  • Page 12: Maintenance

    Jaws were damaged. Jaw Case Jaw Case (Threads) Head (11) (6-1) (6-2) Figure D: Checking Jaw Case Tightness Page 12 For technical questions, please call 1-888-866-5797. Item 93458...
  • Page 13 Loosen Riveter’s Jaw Case and deformed in during installation. use proper size rivet pin. workpiece. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. Item 93458 For technical questions, please call 1-888-866-5797. Page 13...

  • Page 14: Parts List And Diagram

    Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-888-866-5797. Item 93458...
  • Page 15 Assembly Diagram 10A 20 15 16 17 18 30-1 30-4 30-2 30-5 30-3 Item 93458 For technical questions, please call 1-888-866-5797. Page 15...

  • Page 16: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Save PDF