The frequency stability for both 2.4 GHz (802.11b and 802.11g) and 5 GHz (802.11a) operation is +/- 20 ppm. The SDC-EC15N has its own RF shielding and does not require shielding provided by the host device into which it is installed in order to maintain compliance with applicable regulatory standards. Because of this, the device may be tested in a standalone configuration via an extender card.
ECHANICAL PECIFICATIONS Connector Overview The SDC-EC15N is fully compliant with the PCI Express Card Type 1 mechanical standard. It can be inserted in any Express Card hardware interface and typically does not require any additional mounting hardware. RF L AYOUT...
SDC-EC15N Hardware Integration Guide Laird recommends the use of a double shielded 32 AWG cable for the connection between the radio and the antenna. EGULATORY Note: Operation in the 5150-5250 MHz band is limited to indoor use only in some regulatory domains.
RF module in the user’s manual of the device into which the SDC-EC15N is integrated. The following FCC statements must be added in their entirety and without modification into a prominent place in the user’s guide for the device into which the SDC-EC15N is integrated: “IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used...
Industry Canada User’s Guide Requirements As outlined in the Operational Description, the SDC-EC15N complies with Industry Canada (IC) rules for a Limited Modular Approval. To leverage Laird’s grant, the two conditions below must be met for the host device into which the SDC-EC15N is integrated: 1.
SDC-EC15N Hardware Integration Guide When using Laird’s IC grant for the SDC-EC15N, the integrator must include specific information in the user’s guide for the device into which the SDC-EC15N is integrated. The integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the device into which the SDC-EC15N is integrated.