Advertisement
Mountway Bath Lift Smart Charger Instructions
This charging guide must be used in conjunction with your bath
Before first operation of your bath lift or after long periods of non-use
(typically 7-10 days), fully charge the battery as follows. A flat battery will
take up to 2 hours to charge.
i) Slide the battery into the track on the charging cradle until it clicks into
place.
Battery
ii) Plug the charger into the mains socket/power outlet outside the
bathroom and switch on the electricity supply. (Note: Ensure you
charge on a hard surface and DO NOT cover the battery or charger.)
iii) The light indicator on the charger box will initially flash in a quick
sequence of red, green, red, green. After a few seconds, a constant red
light appears to indicate charging is in progress.
lift's full operating instructions.
Charging cradle
Charger
Tracks
Light indicator
Advertisement
Table of Contents
Summary of Contents for Mountway Smart Charger
- Page 1 Mountway Bath Lift Smart Charger Instructions This charging guide must be used in conjunction with your bath lift’s full operating instructions. Before first operation of your bath lift or after long periods of non-use (typically 7-10 days), fully charge the battery as follows. A flat battery will take up to 2 hours to charge.
- Page 2 See product labels below: Battery label Charger label Mountway recommends charging the battery after each bath wherever possible and leaving it on charge until your next bath. The battery cannot be overcharged. Issue 6...
Need help?
Do you have a question about the Smart Charger and is the answer not in the manual?
Questions and answers
My smart charger stopped charging. Where can I buy a replacement?