1. Manuals
  2. Brands
  3. Protec Manuals
  4. Welding System
  5. AMC Series
  6. Manual

Protec AMC Series Manual

A/c system maintenance centre
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AC-200A A/C System Maintenance Centre
AC-200A
A/C System Maintenance
Centre

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AMC Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Protec AMC Series

Summary of Contents for Protec AMC Series

  • Page 1 AC-200A A/C System Maintenance Centre AC-200A A/C System Maintenance Centre...
  • Page 2 AC-200A A/C System Maintenance Centre Safety  The machine is designed to be used and repaired by qualified personnel only.  The machine designed for use in recovering the R134a refrigerant fluid used in the air-conditioning (A/C) systems of motor vehicles. Fill the A/C system with the quantity of refrigerant recommended by the manufacturer.

  • Page 3: Table Of Contents

    AC-200A A/C System Maintenance Centre TABLE OF CONTENTS 1. Introduction ..............................1 1) Outline ................................ 1 2) Features ............................... 1 3) Specifications .............................. 1 2. Functions ..............................2 1) Primary functions ............................2 2) Subsidiary functions............................ 2 3. Operation ..............................3 1) Parts descriptions ............................

  • Page 4: Introduction

    AC-200A A/C System Maintenance Centre 1. Introduction 1) Outline AMC series A/C system maintenance equipment is with the latest design technique which uses the best control principle and the manufacturing process. AMC-200A A/C System Maintenance Centre is intelligent equipment collecting of the A/C flushing, recovery, recycling, recharging and other functions in one.

  • Page 5: Functions

    AC-200A A/C System Maintenance Centre 2. Functions 1) Primary functions A. Flushing B. Recovery/Recycling C. Used oil discharging D. Vacuum E. New oil filling F. Recharging 2) Subsidiary functions A. Refrigerant supplying B. Load cell calibration C. Recharging tank exchanging procedure D.

  • Page 6: Operation

    AC-200A A/C System Maintenance Centre 3. Operation 1) Parts descriptions HP gauge Window Alarm light LP gauge Operation panel Air Purge Cooling fan Switch for new oil adding Tubes hang fittings Update New oil bottle Port Switch for used oil discharge Auxiliary Port Used oil bottle LP Port...

  • Page 7: First Use

    AC-200A A/C System Maintenance Centre 2) First use A、 Unscrew the electronic scale support screw before using the equipment. Unscrew support screw. From the back. B、 Please supply about 4 kg refrigerants into the tank of equipment so that all of the functions can be run normally.

  • Page 8: Preparations Before Flushing

    AC-200A A/C System Maintenance Centre Note: also be able to discharge the used oil by press the switch. E、 During the running process, if it displays a code as F00-, please refer to the APPENDIX: ALARM CODE TABLE. 4) Preparations before Flushing A、...

  • Page 9: Vacuum

    AC-200A A/C System Maintenance Centre 6) Vacuum A、 Press key to select the vacuum function. B、 The LED displays the vacuum time. C、 Set the vacuum time by pressing "+" or "-" and press the "ENTER" key to confirm it. It should be more than 15 minutes.

  • Page 10: Refrigerant Supply For The Cleaning Tank (Internal Tank)

    AC-200A A/C System Maintenance Centre When the led as is on, it means that recharge the refrigerant from the recharging tank (external tank). Otherwise, from the cleaning tank (internal tank). iii. It’s by cleaning tank (internal tank) to recharge as default. After fixed the recharging tank (external tank), you can set to recharge refrigerant from the recharging tank (external tank).

  • Page 11: Usage Of The Auxiliary Port

    AC-200A A/C System Maintenance Centre 10) Usage of the Auxiliary Port A、 Leak checking by N2 i. Remove the cap of auxiliary port after the equipment stop working entirely. ii. Connect the N to the auxiliary port. Note: the connector to the auxiliary port must be with thimble. Do not open the valve of N during this process.
  • Page 12 AC-200A A/C System Maintenance Centre vii. Then power off and replace and fasten the refrigerant tank onto the scale pan. B、 Exchange dry filter The dry filter must be exchange after used a period. The machine has set the exchange time. When the dry filter reaches the life time, the LED will show code “F004”.

  • Page 13: Parameter Setting And Inquiring

    AC-200A A/C System Maintenance Centre well. Power off and exchange ok. 12) Parameter setting and inquiring A、 Parameter setting Here can set the cleaning tank or recharging tank as the default recharge tank. Press and hold the "START" key and power on the equipment to enter the mode. The LED displays the parameter code and you can change the code by press "+”...
  • Page 14 AC-200A A/C System Maintenance Centre key to confirm it. Set a same value according to the ID pasted on the dry-filter. Only you set the correct 4 digits, the equipment can accept it Note: The code used already will be not able to be accepted again. Code “CON”: total times of the equipment being operated.

  • Page 15: Appendix: Alarm Code Table

    AC-200A A/C System Maintenance Centre APPENDIX: ALARM CODE TABLE Code Descriptions Emergency Method No enough refrigerant in cleaning F001 Supply refrigerant in time. tank F002 Too much refrigerant in tank Transfer some refrigerant to another tank. F003 High pressure Stop use for a period. F004 No refrigerant to recovery Run next function.

This manual is also suitable for:

Ac-200a

Table of Contents