Kaixin BVT01-YZT-3B Installation Instructions

BVT01-YZT-3B trolley installation instructions
Safety Warnings
To ensure the safety of the installers and operators, please strictly abide the following safety
requirements.
To ensure that this product installed on the level ground, and lock the casters. Otherwise, the
1.
product may move and cause damage.
This product can only used to install the device specified models by Kaixin Company.
2.
Once installed other non-designated or recommended equipments, may result in over capacity of
the trolley and cause damage.
3. Do not put any other non-specified things in the trolley; once dropped, may cause damage.
Important Information
User shall be fully responsible for the maintenance and management of this product on purchasing
1.
the product.
Within warranty period, the Kaixin Company will not be responsible for the following situation:
2.
(1) Damages due to improper operation or deliberate harm.
(2) Product losses induced by Force Majeure (like fire, earthquake, flood, lightning strike etc.).
(3) The Kaixin product not purchasing from Kaixin Company or designated distributors, in case of
damage, Kaixin Company will not warranty.
Prohibit any unauthorized changes to this product.
3.
Non-designated person by Kaixin Company re-modification, alteration or repair this product
4.
causing damage, Kaixin Company will not be responsible for any liability.
Deal with the exhausted product according to the local statute.
5.
This installation instruction gives warnings for predictable dangers. Users shall also exercise care at
6.
any time to be aware of other dangers.
Kaixin shall not be responsible for the problems arising out of neglecting to follow the installation
7.
procedures and instructions herein described.
This installation instruction shall be furnished with the trolley so that operating and managerial
8.
personnel can refer to it any time as necessary.
Components
After customers purchase trolley, unpack and check the followings whether the number of parts is
complete (as Figure 1):
Foot assembly
Pole assembly
Handle
Part Name Each component name
Base
Casters
Pole
Locking screw M5*24*10
Hex bolt M12*40
Large washer Φ35*14.5*3
Small washer Φ23.5*13*2
Spring washer Φ12.5
Pan head screws M6*12
Handle A
Handle B
Pan head screws M5*16
Qty
1 pc
4 pcs
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
2 pcs
1 pc
1 pc
2 pcs
1