Advertisement
Advertisement
Table of Contents
Summary of Contents for Luceat NANOVIDA
- Page 1 USER'S MANUAL CCD CAMERA OVER PLASTIC OPTICAL FIBER NANOVIDA . 2009 PRELIMINARY VERSION FEB...
- Page 2 DESCRIPTION This camera uses a SONY charge coupled device (CCD) image sensor, employs a digital signal processor (DSP) chip-set for image control and all integrated state circuitry, which provides extremely long life and high reliability. This camera offers excellent image quality and it is not subject to distortions due to magnetic fields.
- Page 3 OPERATING INSTRUCTIONS 1. Connect the optical output to the plastic optical fiber. 2. Connect the power source: +12V DC is the red wire on the camera. 3. When the picture appears on the monitor, only if necessary, adjust the focus to obtain the best picture: remove the cap cover from the top of the lens mount and screw the lens into the lens mount until the subject is in focus and the picture is clear.
- Page 4 Luceat SpA Via Angelo Canossi 18 25030 Torbole Casaglia (BS) -Italy Tel. +39 030 9771125 Email: info@luceat.it www.luceat.it . 2009 PRELIMINARY VERSION FEB...
Need help?
Do you have a question about the NANOVIDA and is the answer not in the manual?
Questions and answers