1. Manuals
  2. Brands
  3. Powerplus Manuals
  4. Printer
  5. AP-8220
  6. How to use & set up ethernet

Powerplus AP-8220 How To Use & Set Up Ethernet

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AP-8220 Thermo-Printer
How to use & set up ETHERNET

1. Connection of Ethernet

1) Host <-> Printer
Lan Cable : Use of cross Cable
-
This is a method of communication without Hub and it will make possible
-
only 1:1 communication with the Host
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AP-8220 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Powerplus AP-8220

  • Page 1 AP-8220 Thermo-Printer How to use & set up ETHERNET 1. Connection of Ethernet 1) Host <-> Printer Lan Cable : Use of cross Cable This is a method of communication without Hub and it will make possible only 1:1 communication with the Host...
  • Page 2 2) Host <-> Hub <-> Printer Lan Cable : Use of direct Cable This method is a communication through Hub between Host and Printer and it will make possible N:1 communication with the Host. This also makes possible the connection with outer network by way of using the Hub.
  • Page 3 Connection of Wireless LAN 1) Adhoc Mode - Ad-hoc is a method of communication without AP(Access Point). Because the communication is made without AP, it cannot be connected to an external network or internet. This method is also called ‘peer-to-peer’mode...
  • Page 4 2) Infrastructure Mode Infrastructure mode is a communication method through AP(Access Point) between Host and Printer. Organizing a network by Infrastructure makes possible wired/wireless internet communication by way of wired network communication through AP.
  • Page 5 Basic setting 1) Ethernet IP Address : 192.168.0.192 Subnet Mask : 255.255.255.0 Gateway : 192.168.0.1 Port : 9100 2) Wireless Lan - Network Mode : Ad-hoc IP Address : 192.168.0.192 Subnet Mask : 255.255.255.0 Gateway : 192.168.0.1 Port : 9100...
  • Page 6 How to check on setting 1) Ethernet (1) Self Test Turn off the printer. Turn the printer back on while holding the Feed Button and the printer will print out information on basic configuration (2) Ethernet Interface Reset S/W Please press Reset S/W with any objects with a pointed tip while leaving the power of the printer on and it will print out information on configuration 2) Wireless Lan (1) Self Test...
  • Page 7 How to reset setting 1) Ethernet There is no way to reset the setting in Ethernet. Please check on the setting and modify it directly. 2) Wireless Lan You can reset setting of Wireless LAN by obeying the following instruction. To reset setting, turn off the printer and turn the printer back on while holding Reset S/W of Wireless Lan and it will be reset after 2-3 seconds.

Table of Contents