Advertisement
INSTALLATION
1.
Loosen the central knob.
2.
Press down the light stand tubes to the required angle and then tighten the knob to
secure.
3.
Loosen the central knob.
4.
Raise the light stand tubes and then tighten the knob.
5.
Loosen the light stand mount locking knob and attach the LED ring light onto the
stud of light stand.
6.
Completely place the LED ring light and then tighten the locking knob until it is
secure.
7.
Loosen the angle tilt knob, adjust to the required angle and then retighten the
angle tilt knob until it is secure.
Advertisement
