Advertisement
All manuals and user guides at all-guides.com
Use only rinse aid intended for household
dishwashers.
The rinse aid is specially formulated to be
used in the dishwashers for the prevention
of watermarks and scale on dishes and to
increase the efficiency of the washing and
C
drying processes. Therefore, make sure that
there is adequate amount of rinse aid in the
rinse aid dispenser of your machine.
You can adjust the amount of rinse aid used
during the wash programme by turning the
rinse aid dispenser regulator (C).
The dispenser regulator (C) may be set
E
between levels 1 and 6 (6 being the
maximum amount of rinse aid usage). Your
machine is pre-set at the factory to level 4.
According to the finish and drying results
obtained, adjust the dose of rinse aid by
means of the six position selector. (Position
1: minimum dose, Position 6: maximum
dose.) Gradually increase the dose if there
are drops of water or lime spots on the
dishes after washing. Reduce it if there are
sticky whitish streaks on the dishes.
Open the rinse aid dispenser lid by pressing
the button as shown in the diagram.
Fill up with rinse aid until the container is
full to level of ’max’ mark .
Put the lid (E) on and ensure you hear the
clicking sound.
Remember to CLOSE the lid after every
Dark = sufficient rinse aid
Light = add rinse aid
refill.
Make sure you clean any rinse aid that you
might have spilled.
13
Advertisement
