Advertisement
WIRING INSTRUCTIONS
SAE D-SERIES
1. Place 5/16-18 Carriage Bolt (E) into
Mounting Bracket (D).
2. Use M6 Allen Socket Head (B) and
M6 Nyloc Nut (C) to attach Mounting
Bracket (D) to Housing (A).
3. Drill a 5/16" hole into desired
mounting location.
4. Use 5/16": Flat Washer (F), Lock
Washer (G), and Nut (H) to secure
light assembly to vehicle.
5. Tighten all hardware.
SAE E-SERIES
1. Place 1/4-20x1" hex head bolt (C)
into Light housing (A).
2. Next insert mount bushing onto
the 1/4-20 hex head bolt (C).
3. Choose desired mounting height
and place supplied mounting
bracket (E) over mounting stud (C).
4. Secure the mounting assembly
with 1/4" flat washer (D) and 1/4-20
Nyloc nut (B).
5. Tighten all hardware.
SAE SR-SERIES
1. Place 1/4-20x1" hex head bolt (C)
into Light housing (A).
2. Next insert mount bushing onto
the 1/4-20 hex head bolt (C).
3. Choose desired mounting height
and place supplied mounting
bracket (E) over mounting stud (C).
4. Secure the mounting assembly
with 1/4" flat washer (D) and 1/4-20
Nyloc nut (B).
5. Tighten all hardware.
A - LED Light (Housing)
B - M6 Allen Socket
Head (2)
C - M6 Nyloc Nut (2)
D - Mounting Bracket
A - LED Light (Housing)
B - 1/4-20 Nyloc Nut
C - 1/4-20 HEX Bolt
D - 1/4" Flat Washer
* Long and short brackets provided for additional mounting configurations
A - LED Light (Housing)
B - 1/4-20 Nyloc Nut
C - 1/4-20 HEX Bolt
D - 1/4" Flat Washer
* Long and short brackets provided for additional mounting configurations
E - 5/16-18 Carriage Bolt
F - 5/16" Flat Washer
G - 5/16" Flat Washer
H - 5/16-18 Nut
E - Mounting Bracket
E - Mounting Bracket
Advertisement
