Token Timer 8000-AC-BL-US-35 Instructions

IN THE BOX:

1. Token Timer Unit
2. 20 Tokens
3. 2 keys
4. Lock Tape

SETUP:

1. Plug the power cord of the Token Timer into a wall outlet.
2. Plug the power cord of the device you would like to control into the female power cord of the Token Timer
3. Wrap the connection between the Token Timer and the device securely with the lock tape.

USE:

1. Insert tokens to allow power to the controlled device. Each token allows 35 minutes of power, and Token
Timer will add time for multiple tokens.
2. The lights will flash as each token expires, and shut off one by one for the last token.
3. The buzzer will sound when one minute remains before the power is cut off. *
4. To retrieve tokens, insert and turn the key in the top of the Token Timer and twist the lid.
5. Leaving the key engaged also activates Parent Mode, which allows continuous use as long as the key is in
the unit.

TIPS:

1. Keep the keys in a secure location.
2. Keep extra tokens secure by leaving them inside Token Timer.
3. Use parent mode to allow access for long periods of time.
4. Determine a weekly allowance for Tokens, or use them on a reward basis.
5. Use Token Timer to monitor and limit you own usage.
6. Check tokentimers.com for available accessories and more helpful usage tips.
7. Purchase additional Token Timers to control these and many other devices:
Televisions
•
Video Game Systems
•
Computer Monitors
•
Stereo Systems
•
Video Projectors
•
Guitar Amplifiers
•
* Some devices such as video projectors require a short length of power for proper shut down. In this case be sure to power
down the device before time expires on the Token Timer. Some devices will be returned to factory defaults when power is cut.
To observe how Token Timer will affect your device when power is cut, unplug the device.