Page 2
Congratulations on your purchase induction plate OURSSON!
Page 3
INTRODUCTION The induction cooker works on the basis of an electromagnet that creates a powerful, high-frequency electromagnetic field. When cookware consisting of magnetic material (e.g. iron) is placed on the induction cooker, the electromagnetic field transfers energy to the bottom of the cookware, which causes the cookware and the food inside it to become hot.
Page 4
• If the mains cord is damaged, you must have it replaced by Oursson, a service centre authorised by Oursson or similarly qualified persons in order to avoid a hazard. • If the surface of the cooking plate is cracked, switch off the appliance and do not use it anymore to prevent the risk of electric shock.
Page 5
INTRODUCTION CAUTION • Never use any accessories or parts from other manufacturers or that Oursson does not specifically recommend. If you use such accessories or parts, your guarantee becomes invalid. • Do not expose the induction cooker to high temperatures, hot gas, steam or damp heat. Do not place the induction cooker on or near an operating or still hot stove or cooker.
ELECTROMAGNETIC FIELDS (EMF) This Oursson appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.
Page 7
INTRODUCTION RECOMMENDED TYPES AND SIZES OF COOKWARE ATTENTION! Use only the cookware suitable for induction plates. Suitable cookware for the induction plates Cookware NOT suitable for the induction cooker Cookware with a bottom made of iron or magnetic Cookware with a bottom made of non-iron metal, stainless steel glass, aluminium and copper Cookware with a concave or convex bottom...
INTRODUCTION GENERAL DESCRIPTION Mains cord Cooktop Left cooking zone Air outlet left Air inlet left Left panel control Right cooking zone Air outlet right Right panel control Air inlet right...
GENERAL DESCRIPTION USING THE APPLIANCE Use this button to switch ON/OFF the main power of the induction plate. Use this buttons to adjust the heating power level or temperature, or to set the cooking timer. Use the power adjustment power to set the heating power level or temperature. to use PREHEAT mode.
GENERAL DESCRIPTION USING THE DIFFERENT MODES You can simply operate the appliance manually Put the mains plug in the wall socket, the appliance produce a 2-second beep. «L» shows and blink on • the display. The induction plate goes to the stand-by mode. •...
Page 13
GENERAL DESCRIPTION STEW MODE In stand-by mode touch this button to use STEW mode. The display shows the heating power level 1600 Watt and cooking time «1:00» hour, by rotaiton of each value.These values are set by default. Your induction plate is in stew mode. You may stop STEW mode also by touch button.
GENERAL DESCRIPTION COOKING TIME SET MODE • Touch the button one time during the cooking mode, the cooking time light goes on. The induction plate is in stand-by mode to set the cooking time. Set the cooking time by using the buttons.
GENERAL DESCRIPTION CLEANING AND MAINTENANCE Cleaning Never immerse the appliance in water nor rinse it under the tap. Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Do not put vinegar on the cooktop. Unplug the appliance and let it cool down.
If your induction cooker does not function properly or if the cooking quality is insufficient, consult the table below. If you are unable to solve the problem, contact a Oursson service centre or the Customer Care Centre in your country.
Page 17
• Check if the voltage in your home is suitable for the supply network induction cooker E:01; E1;E:02; • T ake the appliance to your Oursson dealer or a service E2; E:04; centre authorised by Oursson. E4;E:05; E5; E:II; Eb...
Page 18
OTHER Technical specification Model name IP2310T Power consumption, Watt 3300 Left zone power, Watt 2100 Right zone power, Watt 2100 Voltage ~ 220 V; 50 Hz Protection class The storage and delivering temperature from –25°C till +35°C Operation temperature from +5°C till +35°C...
Need help?
Do you have a question about the IP2310T and is the answer not in the manual?
Questions and answers