GE JBP62 Owner's Manual page 22

Usingthe self-cleaning oven.
o
Us lf
LCleo.J
o
k_0"J
How to Belay the Start of Cleaning (on some models)
Make sure tile clock sho_s tile correct
tiine of day.
] I,atch tile door.
] Touch
tile Self Clean pad.
] Using tile ÷ or - pads, enter tile
desired clean tin/e.
[] Touch tile Start/Tree pad. Tile
earliest stail time )ou can set will
appear in tile displa?.
] Using tile ÷ or - pads, enter tile
tin/e of da_ _ou want tile clean c_cle
to St;/l_,
Tile display will show tile start time. It
will not be possible to unlatch tile oven
door until tile temperature drops below
tile lock teInperamre.
The ()\'e n sh uts off a utom aticallv wh ell
tile clean cycle is complete, and 0:00 will
flash in tile displa>
[] Toudl
tile Start/On pad.
To Stop a Clean Cycle
Touch tile Clear/Off pad.
_fit until tile oven has cooled below tile
locking teinperamre to unlatch tile dooi:
You will not be able to open tile door
right away unless the oven has cooled
below tile locking ten]pei'ature.
After a Clean Cycle
You nIav notice some white ash in tile
oven. _ii)e it up with a daInp cloth after
tile ()veil cools.
If white spots remain, remove them with a soap-
filled steel wool pad and rinse thoroughly with
a wnegarand water mixture.
These deposits are usually a salt
residue that cannot be reinoved bv
the clean cycle,
If tile oven is not clean after one clean
cycle, repeat the cycle.
iJi:: Y ou cannot set tile oven fi)r cooking
until tile oxen is cool enough fl)r tile
door to be unlatched.
_: While tile oven is sel6cleaning, you
can press the Clock pad to display
the tinIe of day. To return to the
clean countdown,
press tile Self
Clean pad.
_: Apply a sInall anI ount ot vegetable oil
to a paper towel and wipe tile edges of
the oven shelves with the paper towel.
Do not spiay with Pare _ or other
lubI_icant sprays.
22