Summary of Contents for WDT Solfog V2
- Page 1 Operating and installation instructions Brine fog making Type Solfog V2 Item no.: 26143 Language: EN...
-
Page 2: Table Of Contents
6.3.15 Info ............................25 Top up consumables ........................26 6.4.1 Refill / change the brine solution ....................26 6.4.2 Refill / change fragrance ......................26 Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 2 of 39... - Page 3 Publications of any kind and translation into other languages, also of excerpts, is only permitted with the explicit approval of WDT - Werner Dosiertechnik GmbH & Co. KG. These operating instructions are based on the German original provided by the WDT company. Responsible for the content: WDT - Werner Dosiertechnik GmbH &...
-
Page 4: Information Regarding These Instructions / General Information
Information regarding these instructions / general information Scope of validity These instructions describe the function, installation, commissioning and operation of the Solfog V2 brine fog making device with appropriate accessories. The operating instructions must be carefully read before using or maintaining the device and have... -
Page 5: Warranty
(see below) to WDT should there nevertheless be a reason for complaint. General warranty conditions WDT provides a warranty for 2 years from the date of commissioning, a maximum period of 27 months after delivery, assuming correct installation and commissioning with completed and signed commissioning protocol. -
Page 6: Safety
Safety Appropriate use The brine fog making device Solfog V2 may only be used for the purposes specified in Section 3.2 of the product description! The locally applicable regulations regarding accident prevention, worker safety and drinking water protection must be adhered to. -
Page 7: Protective Measures And Behavioural Rules
Poison Emergency Call Munich (or any other poison centre) Telephone: +49 89 19240 2.2.2 Protective measures and behavioural rules ATTENTION ! Please adhere to the locally applicable regulations! Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 7 of 39... -
Page 8: Product Description - Delivery Scope
Product description The brine fog making system type Solfog V2 is foreseen to produce a salty sea climate in rest spaces, salt spaces, infra-red cabins and saunas. The brine fog maker makes a fog of the brine or also water, by means of an ultrasonic fog maker. -
Page 9: Control Unit
Hose pumps are extremely reliable and particularly easy to operate. Figure 2, Hose pump function Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 9 of 39... -
Page 10: Ultrasonic Fog Maker
Enter the data on the name plate of your device here. Array 1: Enter the serial number Array 2: Enter the production date Figure 5, Name plate Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 10 of 39... -
Page 11: Technical Data
Humidity in utility room max. 70% Ventilation and extraction Recommended for the utility room Software version Hardware version NT 35 V2,0 + MP3HMI / V4.0 Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 11 of 39... -
Page 12: Transport / Storage
The environmental temperature may not exceed 20°C. Also see Section 2.2.1 Handling chemicals. ATTENTION ! Observe the regionally applicable regulations for handling chemicals! Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 12 of 39... -
Page 13: Assembly
Assembly information (installation suggestion) The Solfog V2 is mounted on a wall in the utility room. The pipe to the cabin should be as short as possible (maximum 4m). Consider the space required for operation and maintenance of the device described in Section 3.4 Technical data. -
Page 14: Mechanical Installation
Mechanical installation Assemble the fog making The Solfog V2, except for the roll carrier and the brine solution, is supplied ready for use. It must be installed at a place that is easy to access. Fix the assembly plate with 4 screws tightly on the wall and secure a good accessibility. -
Page 15: Electrical Installation
Open the casing, put the DIP switch SW2-5 in the position OFF The factory settings are recovered. Notice: If the DIP switch SW2-5 stays on ON, new adjustment are saved! Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 15 of 39... -
Page 16: Initial Operation
Figure 8, Hose pump displayed in black)! 2. Push the yellow roller carrier onto the axle. Figure 9, Insert the roller carrier Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 16 of 39... -
Page 17: Perform Disinfection
Navigation downwards The arrow key can be used to move downwards or to adjust numerical values. Figure 12, Display of operating elements Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 17 of 39... - Page 18 Turn the connected tank upside down and slide it in the console. Guarantee that the yellow flange ring is situated in the guide foreseen for this purpose. Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 18 of 39...
- Page 19 Confirm the message with Enter Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 19 of 39...
-
Page 20: Filling And Starting The Brine Fog Maker
Empty the fog maker tank, rinse with potable water, and then put the empty fog maker tank back. Figure 16, Remove the fog maker container Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 20 of 39... - Page 21 63. yellow belt ring Figure 18, politainer connection with connection plug Connect the device on the main switch. The device is then ready to use. Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 21 of 39...
-
Page 22: Operation / Handling
(if that has not already been done). Control - software The Solfog V2 has a LCD-display with 3 operation keys. Possible external control signals and the accumulated fault message can be connected on the control casing. -
Page 23: The Main Menu
See Section 5.2.2, Perform disinfection . 6.3.2 Break time Adjust the Break time between 2 fog productions and save with the Enter button. Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 23 of 39... -
Page 24: Fog Time
“Tank empty” is displayed. Adjust the desired time and save with the Enter button. Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 24 of 39... -
Page 25: Flow Pump
Select the desired language, and save with the Enter button. 6.3.15 Info Information regarding the device type and the software version are found here. Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 25 of 39... -
Page 26: Top Up Consumables
3. Fill the desired fragrance in the fragrance tank until the marking (max. 50ml). 4. Use only appropriate fragrance oil concentrations to fragrance the room! 5. Screw the fragrance tank again in the aluminium holder. Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 26 of 39... -
Page 27: Maintenance, Service, Faults
Press onto both handle recesses until the housing clips open. Swivel the lid sideways. The housing is closed in reverse order Figure 21, Open the control housing Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 27 of 39... -
Page 28: Check / Replace Hose Set
Figure 22, Hose dosing pump spare parts Changing the hose set and roller carrier see description in Section 5.2 Commissioning work, "Insert roller carrier at the fragrance pump". Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 28 of 39... -
Page 29: Regular Water Inspection
It is furthermore possible that the switches or sensors are faulty and that it is therefore not possible to transmit an electrical signal. Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 29 of 39... - Page 30 Check the plug of the ultrasonic fog maker The stored adjustments will get lost Dip switch SW2-5 in position Set Dip switch SW2-5 to OFF Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 30 of 39...
-
Page 31: Shutting Down - Storage - Disposal
The instructions in the "Commissioning" chapter must be adhered to and the steps in the commissioning protocol must be performed when re-operating the device. Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 31 of 39... -
Page 32: Documents
Brine fog maker, Type Solfog V2 Documents Declaration of conformity Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 32 of 39... -
Page 33: Terminal Plan
Brine fog maker, Type Solfog V2 Terminal plan Note regarding terminal plans: Terminal connection plans are also contained in the switch cabinet of the device. Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 33 of 39... -
Page 34: Commissioning Protocol / Instruction
This protocol is to be completed by the commissioning technician! All warranty claims expire when no completed and signed commissioning protocol is available! The commissioning protocol is included in the documents attached. Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 34 of 39... -
Page 35: Operating Data Sheet
Empty message 15 sec 1-120 sec Flow pump 5 sec 1-20 sec Device-test 20 sec Pump-test 20 sec Fan-test 20 sec Contrast 0-15 Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 35 of 39... -
Page 36: Maintenance Protocol
The maintenance protocol is included in the documents attached. ATTENTION: ! Do not clean the fog maker membrane with sharp objects, use only a soft cloth or paper tissues. Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 36 of 39... -
Page 37: Disinfection Protocol
Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 37 of 39... -
Page 38: Spare Parts List, Wearing Parts List, Consumables List
24907 20 tablets SOLDOS disinfection 24907 25 tablets SOLDOS disinfection 19871-1 Fragrances: A list of the current fragrances is available from WDT. Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 38 of 39... -
Page 39: 10 Appendices
Brine fog maker, Type Solfog V2 10 Appendices Commissioning protocol Maintenance protocol Own notes Index: 01 Change date: 12/12/2017 Operating instructions no.: BA DW 018-01 Solfog V2 EN.docx Page 39 of 39... - Page 41 ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ Commissioning and instruction performed by: Persons instructed: Signature of commissioner: Countersigned by operator: Page 1 of 1 Z:\org-wdt\02 Qualitätsmanagement\ISO 9001\MS - Originale - Formuale, Prüfbericht etc\WDT Inbetriebnahmeprotokoll IP\WDT IP 38 Solfog V2 EN FO 00.doc...
- Page 43 Signature Countersigned by operator: Z:\org-wdt\02 Qualitätsmanagement\ISO 9001\MS - Originale - Formuale, Prüfbericht etc\WDT Wartungsprotokolle WP\WDT WP 44 Wartungsprotokoll Solfog V2 DE FO 00.doc = work completed Key: F= every 28 days; 1 = every month, 3 = every 3 months, 6 = every 6 months, etc.;...
Need help?
Do you have a question about the Solfog V2 and is the answer not in the manual?
Questions and answers